CelicaTech Main Page  CelicaTech Member List CelicaTech Image Gallery CelicaTech Data Garage Chatroom CelicaTech Forums Search CelicaTech Forums Contact CelicaTech
+ Reply to Thread
Results 1 to 13 of 13
  1. #1
    Senior Member jaydog82 is on a distinguished road

    Join Date
    Nov 2008
    Location
    Martinez, CA
    Posts
    796

    Default Aftermarket u-joint/spider joint

    Having a hard time finding non oem ujoints for my st165 drive shaft

    Sent from my HTC Sensation 4G using Tapatalk
    ST165

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    JDM engine and new turbo. SPEC stage 2 clutch,walbro 255lph fuel pump, AEM dry flow filter and custom 3" straight intake, 3" ausie DP, upgraded HE and heat wrapped ST165 WTA IC, 8mm magnacore wires, speedsorce solid motor mounts, ASI Aluminum RAD, 2micron second oil filter kit, prosport EGT-BOOST-WB O2 gauges, all new: seals/gaskets/belts/hoses/ Water Pump/ Timing belt kit, Rebuilt half shafts, new drive shaft u-joints, new control bushings, cleaned and balanced injectors,

  2. #2
    Senior Member jaydog82 is on a distinguished road

    Join Date
    Nov 2008
    Location
    Martinez, CA
    Posts
    796

    Default

    ok so according to toyota the part number for the spider kit/u-joint is 04371-60100 and according to toyotapartscheap.com the same u-joint fits many toyotas. So an aftermarket u-joint from one of the other toyotas should work for the ST165.



    Mechanical Catalog
    Item Number MSRP Core Price Price
    0437160100 $69.78 $0.00 $55.82
    Front drive axle - Drive axles - Propeller shaft - Universal joints
    Universal joints, 4runner, 2wd 2010

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Drive shafts - Propeller shaft - Universal joints
    Universal joints, celica 1989 - 1993

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, supra - independent type 1984 - 1992

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, pick-up, 2wd 1991 - 1994

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, 4-runner, 2wd 1991 - 1994

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, previa, 2wd 1991 - 1994

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, pick-up, 4-runner, 4 cylinder, 2wd, manual trans, 5-speed 1984 - 1990

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, pick-up, 4-runner, 4 cylinder, 2wd, auto trans 1984 - 1990

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, pick-up, 2wd 1995

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, 4-runner, 2wd 1995 - 2002

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, 4-runner, 4wd, 2wd 2003 - 2009

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, tacoma, 2wd 1995 - 2000

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, tacoma, 2wd, 2.4l, toyota 2001 - 2004

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, tacoma, 2wd, 3.4l, manual trans 2001 - 2004

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, 4runner, 2wd 2010

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, previa, 2wd 1995

    Add to Cart Contact Us
    0437160100 $69.78 $0.00 $55.82
    Universals & rear axle - Rear axle - Propeller shaft - Universal joints
    Universal joints, previa, 2wd, toyota 1996 - 1997
    http://www.trademotion.com/partlocat...&siteid=214001

    Narrow Your Results

    search

    attribute

    You Selected:

    Drive Type [Rear Wheel Drive]

    clear vehicle attributes

    brand

    Master Pro U-Joint (4)
    Precision (6)

    price

    under $10.00 (3)
    $10.00 - $29.99 (7)

    availability

    In Store Now (7)
    Online Now (10)

    On most orders

    On most orders

    of $75 or more!

    Click for Details

    1 - 10 of 10 results

    View:

    Sort by:
    Most Popular
    Price Low to High
    Price High to Low
    Brand

    Master Pro U-Joint - Universal Joint
    Master Pro U-Joint - Universal Joint

    $8.99 Each
    Add to Printable List
    Online: Available
    Store: Available

    2 Year Limited Warranty
    Multiple Applications
    Center
    - Rear Wheel Drive
    - Standard Kit
    - 4 Outer Snap Rings
    - 1.063 Inch Bearing O.D.
    - Quantity Per Vehicle: 1
    Front
    - Rear Wheel Drive
    - Standard Kit
    - 4 Outer Snap Rings
    - 1.063 Inch Bearing O.D.
    - Quantity Per Vehicle: 1
    Rear
    - Rear Wheel Drive
    - Standard Kit
    - 4 Outer Snap Rings
    - 1.063 Inch Bearing O.D.
    - Quantity Per Vehicle: 1

    Part # : 369 | Line: MPJ
    Master Pro U-Joint - Universal Joint
    Master Pro U-Joint - Universal Joint

    $9.99 Each
    Add to Printable List
    Online: Available
    Store: Available

    2 Year Limited Warranty
    Multiple Applications
    Front
    - Rear Wheel Drive
    - Optional Kit
    - Flushed Zerk
    - 4 Outer Snap Rings
    - 1.063 Inch Bearing O.D.
    - Quantity Per Vehicle: 1
    Rear
    - Rear Wheel Drive
    - Optional Kit
    - Flushed Zerk
    - 4 Outer Snap Rings
    - 1.063 Inch Bearing O.D.
    - Quantity Per Vehicle: 1
    Center
    - Rear Wheel Drive
    - Optional Kit
    - Flushed Zerk
    - 4 Outer Snap Rings
    - 1.063 Inch Bearing O.D.
    - Quantity Per Vehicle: 1

    Part # : 379 | Line: MPJ
    Master Pro U-Joint - Universal Joint
    Master Pro U-Joint - Universal Joint

    $11.99 Each
    Add to Printable List
    Online: Available
    Store: Available

    2 Year Limited Warranty
    Multiple Applications
    Center
    - Rear Wheel Drive
    - Optional Kit
    - Zerk In Bearing Cap
    - 4 Outer Snap Rings
    - 1.063 Inch Bearing O.D.
    - Quantity Per Vehicle: 1
    Front
    - Rear Wheel Drive
    - Optional Kit
    - Zerk In Bearing Cap
    - 4 Outer Snap Rings
    - 1.063 Inch Bearing O.D.
    - Quantity Per Vehicle: 1
    Rear
    - Rear Wheel Drive
    - Optional Kit
    - Zerk In Bearing Cap
    - 4 Outer Snap Rings
    - 1.063 Inch Bearing O.D.
    - Quantity Per Vehicle: 1

    Part # : 380 | Line: MPJ
    Master Pro U-Joint - Universal Joint
    Master Pro U-Joint - Universal Joint

    $8.99 Each
    Add to Printable List
    Online: Available
    Store: Available

    2 Year Limited Warranty
    Multiple Applications
    Rear
    - Rear Wheel Drive
    - 4 Inner Snap Rings
    - 1.142 Inch Bearing O.D.
    - Quantity Per Vehicle: 1
    Center
    - Rear Wheel Drive
    - 4 Inner Snap Rings
    - 1.142 Inch Bearing O.D.
    - Quantity Per Vehicle: 1
    Front
    - Front Shaft
    - 4 Wheel Drive
    - Quantity Per Vehicle: 1
    Front
    - Rear Shaft
    - 4 Wheel Drive
    - Quantity Per Vehicle: 1
    Front
    - Rear Wheel Drive
    - 4 Inner Snap Rings
    - 1.142 Inch Bearing O.D.
    - Quantity Per Vehicle: 1
    Rear
    - Front Shaft
    - 4 Wheel Drive
    - Quantity Per Vehicle: 1
    Rear
    - 4 Wheel Drive
    - Quantity Per Vehicle: 1

    Part # : 387 | Line: MPJ
    Precision - U Joint - Non-Greaseable Super-Strength
    Precision - U Joint - Non-Greaseable Super-Strength

    $17.99 Each
    Add to Printable List
    Online: Available
    Call Store: Usually Avail. 24 Hrs
    Find store with item

    Limited Lifetime Warranty
    Rear Wheel Drive
    Regular Cab
    With Outside Lock Rings
    A1- At Transmission
    A2- At Rear Axle

    Part # : 269 | Line: PRE
    Precision - U Joint - Greaseable Super-Strength
    Precision - U Joint - Greaseable Super-Strength

    $18.99 Each
    Add to Printable List
    Online: Available
    Store: Available

    Limited Lifetime Warranty
    Rear Wheel Drive
    Regular Cab
    With Outside Lock Rings
    A1- At Transmission
    A2- At Rear Axle

    Part # : 280 | Line: PRE
    Precision - U Joint - Greaseable Super-Strength
    Precision - U Joint - Greaseable Super-Strength

    $23.99 Each
    Add to Printable List
    Online: Available
    Call Store: Usually Avail. 24 Hrs
    Find store with item

    Limited Lifetime Warranty
    Multiple Applications
    Rear Wheel Drive
    - Extra Cab
    - B1- At Transmission
    - B2- At Center Bearing
    - B3- At Rear Axle
    Rear Wheel Drive
    - Regular Cab
    - With Inside Lock Rings
    - A1- At Transmission
    - A2- At Rear Axle

    Part # : 285 | Line: PRE
    Precision - U Joint - Non-Greaseable Super-Strength
    Precision - U Joint - Non-Greaseable Super-Strength

    $21.99 Each
    Add to Printable List
    Online: Available
    Call Store: Usually Avail. 24 Hrs
    Find store with item

    Limited Lifetime Warranty
    Multiple Applications
    Rear Wheel Drive
    - Extra Cab
    - B1- At Transmission
    - B2- At Center Bearing
    - B3- At Rear Axle
    Rear Wheel Drive
    - Regular Cab
    - With Inside Lock Rings
    - A1- At Transmission
    - A2- At Rear Axle

    Part # : 287 | Line: PRE
    Precision - U Joint - Premium
    Precision - U Joint - Premium

    $14.99 Each
    Add to Printable List
    Online: Available
    Store: Available

    Limited Lifetime Warranty
    Rear Wheel Drive
    Regular Cab
    With Outside Lock Rings
    A1- At Transmission
    A2- At Rear Axle


    http://www.oreillyauto.com/site/c/se...niversal+joint
    ST165

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    JDM engine and new turbo. SPEC stage 2 clutch,walbro 255lph fuel pump, AEM dry flow filter and custom 3" straight intake, 3" ausie DP, upgraded HE and heat wrapped ST165 WTA IC, 8mm magnacore wires, speedsorce solid motor mounts, ASI Aluminum RAD, 2micron second oil filter kit, prosport EGT-BOOST-WB O2 gauges, all new: seals/gaskets/belts/hoses/ Water Pump/ Timing belt kit, Rebuilt half shafts, new drive shaft u-joints, new control bushings, cleaned and balanced injectors,

  3. #3
    Senior Member jaydog82 is on a distinguished road

    Join Date
    Nov 2008
    Location
    Martinez, CA
    Posts
    796

    Default

    so now the question is greasable or non-greasable?
    ST165

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    JDM engine and new turbo. SPEC stage 2 clutch,walbro 255lph fuel pump, AEM dry flow filter and custom 3" straight intake, 3" ausie DP, upgraded HE and heat wrapped ST165 WTA IC, 8mm magnacore wires, speedsorce solid motor mounts, ASI Aluminum RAD, 2micron second oil filter kit, prosport EGT-BOOST-WB O2 gauges, all new: seals/gaskets/belts/hoses/ Water Pump/ Timing belt kit, Rebuilt half shafts, new drive shaft u-joints, new control bushings, cleaned and balanced injectors,

  4. #4

    Default

    I'd go greasable, and stay away from Precision brand if you can.
    '92 ST185 All trac
    '92 AE95 wagon x2
    '72 TE27

  5. #5
    Senior Member jaydog82 is on a distinguished road

    Join Date
    Nov 2008
    Location
    Martinez, CA
    Posts
    796

    Default

    stay away from precision, why? I have heard only good things about them.
    ST165

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    JDM engine and new turbo. SPEC stage 2 clutch,walbro 255lph fuel pump, AEM dry flow filter and custom 3" straight intake, 3" ausie DP, upgraded HE and heat wrapped ST165 WTA IC, 8mm magnacore wires, speedsorce solid motor mounts, ASI Aluminum RAD, 2micron second oil filter kit, prosport EGT-BOOST-WB O2 gauges, all new: seals/gaskets/belts/hoses/ Water Pump/ Timing belt kit, Rebuilt half shafts, new drive shaft u-joints, new control bushings, cleaned and balanced injectors,

  6. #6

    Default

    I've owned almost 50 vehicles (I'm in my 30's) and about half were trucks. The ones that I used precision brand were the only ones I had trouble with, ie. brinelling, premature failure, shoddy materials (rolling elements), different measurements across the pins, etc...just crap IMO.
    '92 ST185 All trac
    '92 AE95 wagon x2
    '72 TE27

  7. #7
    Senior Member jaydog82 is on a distinguished road

    Join Date
    Nov 2008
    Location
    Martinez, CA
    Posts
    796

    Default

    So what brand should I look into? I have heard good things about Spicer.

    Sent from my HTC Sensation 4G using Tapatalk
    ST165

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    JDM engine and new turbo. SPEC stage 2 clutch,walbro 255lph fuel pump, AEM dry flow filter and custom 3" straight intake, 3" ausie DP, upgraded HE and heat wrapped ST165 WTA IC, 8mm magnacore wires, speedsorce solid motor mounts, ASI Aluminum RAD, 2micron second oil filter kit, prosport EGT-BOOST-WB O2 gauges, all new: seals/gaskets/belts/hoses/ Water Pump/ Timing belt kit, Rebuilt half shafts, new drive shaft u-joints, new control bushings, cleaned and balanced injectors,

  8. #8
    Senior Member jaydog82 is on a distinguished road

    Join Date
    Nov 2008
    Location
    Martinez, CA
    Posts
    796

    Default

    so what do you guys think about spicer u-joints? from what i can find they are one of the best.
    looks like the spicer 5-1510x will work for the 88 alltrac.
    ST165

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    JDM engine and new turbo. SPEC stage 2 clutch,walbro 255lph fuel pump, AEM dry flow filter and custom 3" straight intake, 3" ausie DP, upgraded HE and heat wrapped ST165 WTA IC, 8mm magnacore wires, speedsorce solid motor mounts, ASI Aluminum RAD, 2micron second oil filter kit, prosport EGT-BOOST-WB O2 gauges, all new: seals/gaskets/belts/hoses/ Water Pump/ Timing belt kit, Rebuilt half shafts, new drive shaft u-joints, new control bushings, cleaned and balanced injectors,

  9. #9
    I'll be the little spoon KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey has a reputation beyond repute KoreanJoey's Avatar
    KoreanJoey has been to an annual Dragon Meet! KoreanJoey has donated to the forums! KoreanJoey helped get Play's clutch job done. KoreanJoey helped Azzy get to The Dragon in 2009. KoreanJoey helped bring Chaos back to the Dragon

    Join Date
    Dec 2004
    Location
    Gig Harbor, WA
    Posts
    7,496
    Images
    85

    Default

    Spicer makes the OE driveshaft for the gen 2 tundra. The same tundra has a driveshaft recall.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    OR Call: 1-877-810-7067
    -Part of the Mod Team-
    Joey; Turning Ricers into Racers, one convert at a time.



    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
    Originally Posted by MCcelica
    Joey wins this thread.

  10. #10
    Senior Member jaydog82 is on a distinguished road

    Join Date
    Nov 2008
    Location
    Martinez, CA
    Posts
    796

    Default

    Well, does anyone have a good brand to go with? Or should I bite the bullet and get some Toyota ones?

    Sent from my HTC Sensation 4G using Tapatalk
    ST165

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    JDM engine and new turbo. SPEC stage 2 clutch,walbro 255lph fuel pump, AEM dry flow filter and custom 3" straight intake, 3" ausie DP, upgraded HE and heat wrapped ST165 WTA IC, 8mm magnacore wires, speedsorce solid motor mounts, ASI Aluminum RAD, 2micron second oil filter kit, prosport EGT-BOOST-WB O2 gauges, all new: seals/gaskets/belts/hoses/ Water Pump/ Timing belt kit, Rebuilt half shafts, new drive shaft u-joints, new control bushings, cleaned and balanced injectors,

  11. #11

    Default

    Spicer is a very good brand.
    '92 ST185 All trac
    '92 AE95 wagon x2
    '72 TE27

  12. #12
    Running a little warm there... klapa is a splendid one to behold klapa is a splendid one to behold klapa is a splendid one to behold klapa is a splendid one to behold klapa is a splendid one to behold klapa is a splendid one to behold klapa is a splendid one to behold
    klapa has been to an annual Dragon Meet! klapa has donated to the forums!

    Join Date
    Nov 2009
    Location
    Cary, NC
    Posts
    1,419

    Default

    In my "distant" past experience with American cars - Spicer was always a common and quality brand for driveline components.

    Stil - these days - you never know what you are getting.... I would recommend NAPA if you don't want to use the dealer stuff - as the NAPA Altrom line parts in many cases are essentially OEM boxed components which are "re-branded" by Toyota and other car manufacturers.
    92 STX "Mr. St" - Daily Driver
    91 Alltrac - Project beater fast car
    93 GTS - Project luxury road car

  13. #13

    Default

    I build drivelines at work on a regular basis, just reporting based on my hands-on experience.
    '92 ST185 All trac
    '92 AE95 wagon x2
    '72 TE27

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Top Member List Chat Forum Search Contact Top