View Full Version : My Cars Kitted!

08-07-2005, 03:11 PM

I finally did it, i finally installed my bodykit. So far i have the invader side skirts mounted, but i need to sand some filler marks that i made when going over the rivets used to hold them on. As for the rear, i custom made one with my imagination, as i did not like the invader rear that i had bought. AS with that i have lots of little dips from the work i did, and i need to fill those in a bit. then it will look good as new. And for the front i dont know yet what to do, i have no money for a front lip and none of them look that good to me, so i may end up making my own lip too. I was looking at my car yesterday on flat ground and there is a couple inch difference between the front and sides :( haha. Oh and i also decided that i would get rid of the front black peices kuz A) they break or B) they chip or C) people ask why they arent white and i feel dumb. And i finally molded on my hood scoop and made it functional too, but i guess i never told you guys that i even had it haha. and soon i will remove the door trim that doesnt fit in very well with the side skirts and it shoud look alot better then. I hope to be done soon and when i am ill post some full side GRADE A pics.... :ugh: well heres a teaser, check out my car domain to get all the pics, be sure to leave comments and vote on my poll. Thanks :wiggle:

Custom Rear, One of a kind....

Front Scoop and Peices Moulded....

Side Skirts :D

08-07-2005, 03:12 PM
Oh and for those that wont notice my Cardomain page is in my signature, and ill give a link right here....


08-07-2005, 03:37 PM
As long as you like it... that is all that matters.

But I will not be showing these pics to Chaos as she would be weeping for her sister...

08-07-2005, 03:41 PM
Your talking about the Front trim arent you, well i know most people say to keep it. But most of my peices were busted or miscolored anyways....so it just works better like this....

08-07-2005, 03:46 PM
Nick, your front end looked so good black with the lights still there.. I would have just added a lip to the bottom...

Oh well its your choice.. I did the same thing to mine...

08-07-2005, 03:57 PM
Please tell me this isn't a finished product.

08-07-2005, 04:02 PM
LOL.... I dont think he is quite done yet... He is going to make a lip or add one to the front, and do alot of sanding....

08-07-2005, 04:17 PM
Yeah i have been talking to dave most of the time whenever i would finish what i was doing. I have alot of sanding, filling in grooves and dips, Primering and painting.

So no this is not near finished if you actually read what i put up there it says

"I hope to be done soon and when i am ill post some full size GRADE A pics.... well heres a teaser"

That says i wanna be done soon, but not yet...i only have a bit ways left to do (not including the front)

I have no clue what to do with the front as of yet, and i have ran out of fiberglass funding, my cans are empty and so are my pockets haha

08-07-2005, 04:56 PM
Yeah its to bad Nick is in MN and im in TN.. I have a full can of fiberglass jelly and a hugh tub of bondo... I've got the spot putty and two good sanders as well... Damn the distance... or u would be welcome to what i got.

08-07-2005, 09:56 PM
haha well thanks for the info...would really help right now....i feel embarrassed driving around like this haha

08-08-2005, 12:17 AM
updated: how it will look when done pics!




08-08-2005, 12:29 AM
Nick the bottom two pics didnt work

08-08-2005, 12:38 AM
I like the rear, the sides are "ok", but the front looks too much like a Ford Probe. If it was an RC front bumper it would look a lot better though. Just my two cents. Props to you for doing something custom, though.

08-08-2005, 12:59 AM
I think it willl come out good in the end.........Kudo's Nick

08-08-2005, 02:04 AM
yeah it does look like a probe, but with a lip it should be ok, i might put a grill in there somehow too... like a small one for some other type of car...like a honda accord grille, but take off the type R badge.


08-10-2005, 05:57 AM
You certainly are making your celica look different, the back looks pretty good, skirts are too offset for the 'smooth' front and rear. I can't say I'm a fan of the front. Nice to see somethin different though.

08-11-2005, 06:37 AM
i really like the turnout thus far.. however i still dont see the 7th gen spoiler, can you please post pics of that?

08-11-2005, 07:13 AM
What sides are those? they fit without mods? I want damned sides but nobody wants to sell alone (:

08-11-2005, 07:31 AM
those are invader side skirts...and as for the spoiler i stated up there that i havnt gotten it yet...thanks for the comments tho guys

08-11-2005, 07:39 AM
Did u have any problems with fitment of the skirt? I mean the rear is wider on a GTS, and you slapped it on a GTS.. just direct bolt-on? or some changes nessesary?

And can I have your door trim moldings? (driver and passenger doors) (:

08-11-2005, 04:45 PM
y do you want my door mouldings? lol...ill sell em for like 5$ plus shipping, and that includes all 3 peices on both sides....

as for the skirt, they fit good as long as you do it on a hot day, and put rivets every few inches like i did.... it holds it snug...on the drivers side i have a front GT fender kuz my mechanic is an idea, so that side fit weird and left a gap by the door, its unoticeable because i fiberglass in a patch and will prolly rivet the gap up a bit. but otherwisethey fit pretty nicely. o bTW this was a invader kit that i bought off evay, and it had really good fitment just so ya guys know....

08-11-2005, 08:38 PM
im going to order the spoiler tomorrow, and hopefully get it in the mail soon after that...

08-12-2005, 01:59 AM
Great I'll PM you for the 6 pieces (:

08-12-2005, 02:24 AM
pm returned....and i think i decided on a front now too...im going to make the first R33 style front for a 5th gen :) :) :)

08-13-2005, 05:15 AM
imagine this front:

on my car.... opinions guys...do you think i would have to cut off my undersupport metal bar thing? or could i keep it? ill try to keep it, if i can then too bad...ill be buying this front in september some time....

comments are welcome everyone....

08-13-2005, 05:19 AM
ooh BTW, ill be resizing the holes and be inserting the bumper lights so that the blinkers are still usable...pic below...


08-13-2005, 08:13 AM
oh my.... so much changes to what was a celica.

Dunno why but it just doesn't float my boat. Good luck with your modding.

08-13-2005, 06:05 PM
Skyline Gt-r Paint On That Would Be Bad @$$

08-13-2005, 06:45 PM
putting a kit on is changing the celica? lol whats your prob man, lots of people put on kits buddy.... as for the front peices moulded i dont like the peices, thats why....and no i will not put on a grille like that one posted above, the was just a idea that i got real quick...

08-15-2005, 03:14 AM
i don' have a problem... not ragging on kitting celicas. IMO the kits made for the 5th gen are not too appealing to me. I would rather just go with the cs front end. That's why I love chewdogg's car so much. He has all the modifications I would make to my car: the mid wing, all-trac hood, cs front. Even the interior with the 7th gen steering wheel, painted dash, and seats.

I'm just a fan of the "clean" look.

08-15-2005, 03:45 AM
yeah well some people who dont like the non-appealing 5th gen kits, will go off and make there own... like me....

08-15-2005, 04:04 AM
heres a pic with the spoiler im ordering soon... its a chop...


08-15-2005, 06:44 AM
oh, I forgot to mention. Since your side skirts are sticking out quite a bit, I suggest you get some wheel spacers. It would make the wheels look flush with your fender and sideskirt.

08-15-2005, 06:54 AM
Wheel Spacers are a must on GT-S and Alltrac/GT4s to getthe look right anyways.

Keep up the work Whyte.

08-15-2005, 07:03 AM
Wheel Spacers are a must on GT-S and Alltrac/GT4s to getthe look right anyways.

Keep up the work Whyte.

:werd: even on my GT the wheels are way too inward, looks retarded since the front ones aren't that bad.

08-15-2005, 08:40 PM
the car looks alright... but i am really not a fan of the back bumper b ut hey whatever turns ur crank...

08-15-2005, 08:53 PM
yeah i plan to get some nice wide wheels, and some nice thick hubcentric spacers...

08-15-2005, 09:48 PM
check out the H&R hubcentric spacers. From what I hear, they're excellent for their price.

08-15-2005, 10:06 PM
yeap seen em, they are 100$ plus shipping for 2 spacers...

08-16-2005, 12:17 AM
so i found a great deal for a 7th gen rx7 front...so i think that i may take that deal, and get it so heres what it will look like...


08-16-2005, 12:45 AM
you should put fogs in the center vents :laugh:

08-16-2005, 12:58 AM
are you making fun of my idea? i dont see you being to unique with your car....im just trying to lead off the path that everyone else is following....and i will have to see about the fogs but if thats supposed to be funny...ITS NOT...sorry...maybe i will get some fogs in there....

08-16-2005, 12:59 AM
wait a moment i just realized what you meant by that, i meant the lower vent holes not the top ones like you were referring to...i meant the lower circular small ones....as for the top vents i will prolly just get a toyota logo, like what is suppose to go in there...

08-16-2005, 01:44 AM
Hmm no offense but the car kind looks like a old probe in that photo shop. I think what makes it look it probish is the shaved corner lights. Kudos on your work.

08-16-2005, 01:48 AM
its the picture that makes it look that way, when i actually do it, im sure i will change something that will make it look diff....thanks tho man

08-16-2005, 01:49 AM
anyone know where i can find one of those Roof/Hatch spoilers?

also i saw that skyline man....DROOL and im gonna make my fenders look like those ones man....that vent thing rocks

08-16-2005, 07:30 AM
not poking any fun at your car. I think if you put fogs on the side vents on the bottom, it would be too widespread. I was thinking you should position them in between the stock projecters. It looks better IMO.

I would rather stick with the stock look rather than going too wild with bodykits and such because I would rather spend it on performance. But I think i've reached the max spending money for my car besides getting new tires, gas, and tinting. Maybe an intake wouldn't hurt but that's it for now. Be sure to post how your car looks after all the work is done. You plan on swapping a 3sgte in or anything?

08-16-2005, 08:21 AM
Kudos on the work, but just a few suggestions:

Get the corner lights back on and the carbon fibre trim, its what made our cars unique, with that RX7 front I think it would look decent with the trim + corners back on.

08-16-2005, 04:02 PM
well i never liked the trim, and i wont put it back on, sorry....it always cracked, fell off, or people asked if i got in an accident and never repainted the trim?.... and it costs money to replace when they break, sumn i dont have....i had a peice of trime missing for like 2 years kuz i couldnt afford the prices i found em for, then finally i found the 2 eyelids for 25$ bux...i will not bring back the peices, i hate them,...sorry....

as for the fog lights i meant like this...that way they would be below the headlights....


08-16-2005, 05:03 PM
take out the center holes in the top of the bumper and its 100% sweet

08-16-2005, 05:30 PM
will have to see how fitment is....

08-16-2005, 07:37 PM
oh... i meant the big wide open space in the center, I think those two holes you circled are too small and it would be hard to find decent foglights to put in them.

08-16-2005, 10:39 PM
ill have to see, they might now be too small...will just have to see what i can find...

08-20-2005, 04:35 AM
well i dunno if ill be getting the bumper for awhile, my car insurance is due this time i get paid, so that took my cash, but i may be able to if im lucky.....but i was staring out the window at my car today.... and i was like hmmm...that would look neat, so this is what i came up with on photoshop....


08-20-2005, 05:52 AM
Nick how the **** do you get your colors to change like that on PS i cant figure it out.. I wanna see my tracker BLACK

08-20-2005, 07:36 AM
Ok I'm a noob here. I think your car looks great. The only thing bugging me is that front end that you want to put on. From the pic, (and I know it's a photoshop), it just looks too long. Like a camaro or something. I think it would look alot better with something like your original choice for the front bumper. I know it's not original but I personaly would go with a modded CS with a lip.

It's not my car though so you can do whatever you want.

I have a question for you though. How did you get rid of the black trim on the front? What did you use just bondo? I don't like it either and I wanted to get rid of it before I repainted my car.

08-23-2005, 01:37 AM
well i sanded the original peices, primer em....and the tip of the hood and headlights too....then i took so resin and pasted on a few layers of mat....let it harden....then i put some bondo over them...but i still need to finish mine...

08-23-2005, 03:19 AM
I think red is starting to sound pretty good right now....right dave! ;)

08-23-2005, 05:47 AM
man your paint job you picked out looks pretty sick. I didnt think a dark colour would contrast that well with the white but it is perfect with the red trim line.

Your car is coming along awsome man keep it up.

I like you idea on the kit, however I think its a little to squareish for the celica, the 5th gen is really full of curves and that 7th gen rx7 front makes it look unproportional with your sides and rear. I think a mid 90's civic hatch, maybe with a kit, would look a bit better. i dunno just athought

08-23-2005, 03:26 PM
i think i may just go for straight up red...but im not sure....

08-23-2005, 04:12 PM
copy cat

08-23-2005, 05:05 PM
keep up with the work i really like the clean molded front its different, keeps people guessing as to what kinda of car your driving...great job sanding and molding but to bad you ran out of that famous stuff called fiberglass, i gots me some sittin on a shelf collecting dust waiting on me to apply it to my new celica but again distance is a problem cause im in georiga...

08-23-2005, 05:46 PM

i was driving with my buddy jeff the other day ^ and was wondering if a precidia kit would fit your celica? just a thought and might give you some more ideas

08-23-2005, 10:36 PM
well whats the front look like?
i think i may go with the 7th gen front kuz, i can get it for real cheap...and its not an ebay knckoff...

08-23-2005, 10:38 PM
i will be getting my wing in the mail real soon....and ill be getting my new front pads and rotors from Dave soon too....

08-26-2005, 03:38 PM
daves rotors didnt fit...they are from a 92 and i didnt know there was a difference...so im stuck with 2 non-usable rotors.....i ran to a nearby junkyard and bought a used 88' Toyota Camry LE rotor, PERFECT FIT....also, after i got back from the junkyard it was late, but i noticed that i needed a new caliper too....so i ran the part numbers on a 88' Camry caliper and a 90' celica caliper...and they match, so today im running back to get that....then ill have useable brakes again....

i havnt got my wing in yet...but it was mailed out like monday...so prolly today or early next week :) Also i would have been able to get my front bumper if this whole brake thing wouldnt have happened....

09-01-2005, 09:37 PM
Good news guys, im going to buy primer this coming thursday.... the 8th of september, and after that i will begin sanding and primering over time....this project is starting to turn out, im also going to be hopefully ordering my front soon too....sanding on rear is almost down, im going to mould on the sides soon also....once im done primering and painting then im going to get spacers and wider wheels....i dunno yet if i could use any fender flares, kuz id have to buy a think spacer....

09-01-2005, 09:38 PM
ooh and i still havnt received my wing....damn UPS!

09-03-2005, 08:54 PM
kudos for the work but too much for my taste, quite frankly the only kit I decently look good on a celica it the fxdesign one. don't end up with another stormtrooper celica :slap:

09-04-2005, 05:04 PM
im not going to have a stormtrooper celica. All im going to do is mould on my full it...and that is all....

09-04-2005, 05:34 PM
ooh and update.... yesterday i got my 7th gen spoiler from UPS. I bolted it on... to my luck on of the pegs snapped, so i driller it out and put in a new one.... It currently black, but will be paint as with the rest of the car.

PC - Smoothed out the pic:

Close up of new wing:

different angle: (gotta finish moulding rear bumper :))

From the top: (gotta sand my hole patches, and clean up my window :))

Further Away:

09-04-2005, 07:56 PM
I started moulding on the side skirt today, but stopped after about an hour, kuz im tired :) i sanded for about an hour also....i filled in my old spoiler holes yesterday... and today i sand smooth about 2/10 of them :)

And i still dont know what color to go with... :)

09-04-2005, 11:32 PM
Spoiler looks nice but why did you leave about a 1/4 of it hanging off the trunk? Did it not fit properly?

09-05-2005, 12:52 AM
It didn't fit, look at it from the front angle, the front tip of the wing is hitting the body, so he had to leave it hanging off the back edge to get it to fit. Make the legs longer on the spoiler and do it right. Please, if you want to shake the Ricer monicker that is growing on you, stop half-assing shit.

Don't get me wrong, I admire you doing something different, I am glad you are working on your car and making it what you want. But you need to get off your high horse about it and stop posting in everyone's threads about how your car is better because you are going custom. Stop calling ppl rice when your car has all the same characteristics.

Keep up the work and be patient and you might wind up with a decent car, but please, for the sake of your car, your reputation (here and outside,) and the experience, stop half assing shit.

09-05-2005, 03:41 AM
hmm...your cars alright i guess..imo...im not really into your style i guess..you mentioned over and over that you dont want a ricey look to your car..or w/e..somehting about your car being ricey..but by the look of your car..iono it does look ricey...=\..i liked your car when it looked stock!..but i guess...keep doing your own thing..good luck

09-05-2005, 05:28 AM
It didn't fit, look at it from the front angle, the front tip of the wing is hitting the body, so he had to leave it hanging off the back edge to get it to fit. Make the legs longer on the spoiler and do it right. Please, if you want to shake the Ricer monicker that is growing on you, stop half-assing shit.

Don't get me wrong, I admire you doing something different, I am glad you are working on your car and making it what you want. But you need to get off your high horse about it and stop posting in everyone's threads about how your car is better because you are going custom. Stop calling ppl rice when your car has all the same characteristics.

Keep up the work and be patient and you might wind up with a decent car, but please, for the sake of your car, your reputation (here and outside,) and the experience, stop half assing shit.

Actually the wing fit quite nicely.... i could have put it up farther, i was not forced to put it back like that, it did not hit on the sides like you said.... and for your knowledge... on the 7th gen it was supposed to fit snug on the sides, it actually has little bump stoppers under the wing tips. Therefore, i decided that i would go for a bit of a different look... as i am always opposed to do...I decided that i liked it best when the rear of the wing swung over the back a bit. Yeah, the rear bolt peg is a little out, but that is becuase i dont have it fully tightened becuase then it will bend the wing back and cause it to tilt. So i have decided that i will go ahead and fill in the 1/4 gap on the wing legs. And bud.... im not on the list of caring. I really could careless what people thing of me, but i feel free to post what i have done to allow others to give their opinions, i am not going to change something to satisfy someone else. As you would like me to. I for one should not be "monickered" to be a ricer. ill give several reason....1) I dont street race 2) i dont have a Gigantic Pathetic Bumpy exhaust 3) I dont talk about cars, when in reality i dont know anything about cars 4) I do all my own bodywork (may or may not be a good reason) 5) I DONT DRIVE A HONDA (j/k)

and as opposed to you, Im not in agreeance to what your statements are saying about you, and as your Signature states, I will not argue with you, because others that are reading may or may not think that im an idiot also... As for now... i have not decided if i will post any other updates any more.... Until i decide. If anyone wants any more pics or info then please message me. Because of this guys "Idiocy" i am not sure if i shall keep posting up my work. :thumbsdow

P.S. As to call me a ricer, then would you not be calling anybody with a bodykit a ricer? Being an invader bodykit, atleast 25 people on this side have this kit installed on their cars. Does that make them ricers too?

atleast i havnt pushed as far as having an aluminum wing on my car or ugly mismatched graphics, If you wonder why i say this. Then look at murga troy's pictures.... :owned:


09-05-2005, 01:10 PM
Oh I am so hurt and owned.

Dude, you are weak and extremely lame.

I was not attacking you, I was offering you a piece of advice, but I suppose you are so far gone that it did no good. A Ricer is not just in the modifications done to a car, it is not the bodykit, it is not the exhaust and it is not the car (ie Honda.) It is the attitude. And you sir, possess that. Your car is shoddily prepared, your modifications are half assed and you constantly try to make it out that your car is better than anyone else's in every thread you post in.

As for Chaos' style. To each thier own. I never once bashed your car, I bashed the modifications that you had performed half assed. I understand that in your immaturity it is a knee jerk reflex to try and attack my car, I am cool with that, I am a bigger person and I can take it. I like the way my car looked back then, there was a purpose for the graphics, for the wing.

I end this post with another piece of advice for you, learn to take critism like a man, if you are going to post pictures of your car and your improper technique you are going to have to have a thick skin.

09-05-2005, 01:58 PM
dude you did attack me, and the way i act? well bud, i really dont run around and act like a little ricer boy. Mainly all i am doing is defending myself.... and as for you saying that im half assing everything, are you saying that because i havent completed the work yet? i havnt had the time in the last month to finish it off, and when i do im either too tired or just dont feel like it. But lately i have spared some time and am trying to finish it. Once i finish it and repaint it. It wont look ricey.... and as for JJAzmin or whatever and murga too.... If you just said that my riceyness was in my attitude, then why did you make the statement that my car was ricey? does that make any sense. Also murga, i can take criticism, but you were just being a bullheaded dickhead up there. You came in here and starting assin' around.

And on your first post up there, for me attacking people? i did that like for a couple days. Thats all. The reason being, was i was having a stroke of bad luck and anger. 1) I was working long hours at work 2) my Fiance was working opposite hours (i didnt get to see her, until night) 3) my brakes were shit, and i was stuck driver a Taurus (still better then "Chaos") 4) I couldnt find the problem with the brakes and i wasted alot of money and time. 5) gas prices were going up, and i was driving a 20 mpg car, instead of my 30 mpg car.

I cleaned up my attitude after that, and as for my reputation. Do you think that i should care what people from other countries or states are thinking of me? do they even know my real name, what street i live on, what color my house is? The chances of seeing any of you outside of this websites is very rare. I can be a dickhead on here if i want, just like you can be a arrogant bastard too. And its your honor to do so. Murga just please pull your dick out of your ass, and quit being such a whore.

09-05-2005, 02:39 PM

Can't we all just get along? What is the world coming to? First the natural diasters, now CTECH is falling, down, down towards a pit of hell, all of this because no one can live and let live.

OH WAIT..... I guess it's not that bad, it just a site with people expressing their opions. IF THIS THREAD DOESN'T PRODUCE SOMETHING USELESS I WILL HAVE TO RESORT TO NOT READING IT ANYMORE.........LOL

09-05-2005, 05:12 PM
whyte, you make me want to beat my head against a wall for hours so I can see what it's like to think on your level. Grow the fuck up man.

09-05-2005, 06:13 PM
whyte, you make me want to beat my head against a wall for hours so I can see what it's like to think on your level. Grow the fuck up man.

I am over this thread. I was trying to say it in a polite manner, but I guess you can not understand that. I am not gonna resort to 'my pee pee is bigger than your pee pee,' so I guess you win. And I am so glad that your Taurus was better than Chaos. You really need to grow up. A lot.

09-05-2005, 08:10 PM
For one, i was just defending my self, and trying to show the Ctech community what i have done and achieved, then you have to be negative and criticize me. In all honesty, if you did something to your car that you liked, would you change it just to satisfy a few people you will never ever meet? or even people that you do know?

09-05-2005, 08:42 PM
im gonna meet Murg.... when i go pick his motorcycle up and help him put in his transmission.....lol

09-05-2005, 08:55 PM
OT: Yeah i so think i want a sportbike. I cannot make up my mind.

On topic: I dont think ill post anymore pics until i get my new front (im ordering it on the 8th, 9th, or 10th.... (whenever i deposit my paycheck in my bank account) Then i should receive it atleast a week later :hehe:

09-06-2005, 04:17 AM
2) my Fiance was working opposite hours (i didnt get to see her, until night)

OT: I don't think it's really appreciated when you use your private concerns as an excuse for rude behavior. Personally whyte, I think you should just calm down and think about your comments and how people would react to them before posting them. I've been going through ctech, not posting too often rather reading threads, and you've been getting into one too many flame battles.

btw... Fiance = a man who is engaged to marry a woman. I'm guessing you meant Fiancee.

On topic: I thought you got rid of the front trim already... were those just photochops in the other pictures?

09-06-2005, 11:17 PM
lol no.... what i meant by the front was the kit that i was buying to put on. The front kit. the Trim is already moulded on and gone.

as for fiancee or whatever, i am engaged.

09-07-2005, 02:38 AM
whyte, you make me want to beat my head against a wall for hours so I can see what it's like to think on your level. Grow the fuck up man.


If your gonna talk shit about others cars, then others are gonna tlak shit about yours. :thefinger especially when your car is such an easy target to make fun of

09-07-2005, 03:57 AM
lol no.... what i meant by the front was the kit that i was buying to put on. The front kit. the Trim is already moulded on and gone.

as for fiancee or whatever, i am engaged.

you're engaged... and you're about 2 years younger than i am... hence your profile


interesting... :bs:

09-07-2005, 04:16 AM

09-07-2005, 04:24 AM
No im serious my fiancee lives with me.

09-07-2005, 04:24 AM
there are certain circumstances. we have been together for 3 years... and there yeha.... its not needed to be posted here....

09-07-2005, 04:32 AM
This thread is turning into the old thread he had about his custom stuff that turned into a HUGE flame war. I'm not a mod but c'mon, keep it clean people.

PS. Your 17 and engaged?!

09-07-2005, 05:10 AM
Like i said, there are circumstances. Just please close this thread. Ill open a new one when im done. If i could delete the flame posts, then i would but i am not a mod.

09-07-2005, 05:52 AM
Screw closing this thread. Will a mod please DELETE this thread. This is probably the thread that has brought out the worst in people.

Nick get your shit straight, you're 17 and I'm sure if you met Murg you wouldnt say any bad shit about his car. This is supposed to be a community, not a bashing fest.

PS. Murg, I love Chaos.

09-07-2005, 11:30 PM
17 !!!?!!?...engaged!!!!??!...still in high school!?!?!??!...INSANE!!!!..whOOoahaAAAhaaao!!!!. :( :wtf:

09-07-2005, 11:35 PM
serously is this your guys bizz? i have the right to have all my info i posted to be here, if murg wouldnt have started his shit. then this wouldnt be like this. Big whoop if im engaged... fuck off people

09-08-2005, 12:06 AM

We dont care that you're so called "engaged." If you even know the meaning of that. I hardly doubt u can afford an engagment ring if you even afford a lambo door kit for $800.


09-08-2005, 12:12 AM
TEAMfaint your doubts will all be answered if you refer to occupation.

09-08-2005, 12:42 AM
i had money at the time...sorry i guess delete this, there will be no record of my work...or whatever...fuck this site im gone....

09-08-2005, 12:49 AM
Its not hard to repost a thread showing just pics. Just stop verbally attacking everyone who has a comment about your car.

09-08-2005, 12:51 AM
..... :lastyr:

:wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad: :wavesad:

09-08-2005, 01:23 AM

09-08-2005, 01:25 AM

09-08-2005, 02:11 AM
BTW, Whyte, get over it, I did not start shit. You did when you went off the deep end about what I said. I said what I said in a polite sedate manner that was in no way an attack. You attacked me. You are the biggest hypocrite on this site.

I will see what I can do about getting this thread closed.

And if Whyte turns every thread he posts in into a flame war, I will see what I can do about getting all his threads closed. :hehe:

09-08-2005, 03:34 AM
By the request of others this thread is CLOSED.