View Full Version : Whiteline Rear Sway Bay

06-22-2005, 03:50 AM
Ok, so My car is lowered and I had to cut my rear endlinks to get the rear struts on. Now my swaybar is floppin around. Here is my dilema...Instead of cutting the old endlinks off the swaybar, should I just go with Whiteline and some new endlinks, or just fix what I have and get new endlinks? Someone push me over the edge.

06-22-2005, 05:11 AM
Depends on how much more handling over ride comfort you want to achieve -- and if you can get a good price. Best I've seen on stock endlinks if $38 each.

Since you don't list lowering springs, I'd say go for the Whiteline and polyurethane bushings.

06-22-2005, 01:34 PM
I want to AutoX the car. ride doesn't bother me. I have Sportlines on the GR2's and Where can I get the Whiteline rear sway bar?

06-22-2005, 01:45 PM
185performance.com I know sells it...not sure but summitracing.com might as well. Run a search on here, it's been discussed a few times.

06-22-2005, 04:07 PM
I got a whiteline sway bar. In the process of installing it. I decided that it would be a very good way to improve handling without disturbing ride quality barely at all. For endlinks, I have found some sources cheaper than toyota. I bought a set of these http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7978963862&category=33592&sspagename=WDVW which are near identical to the oem rear links except don't have that annoying allen key for tightening...much better as I'm sure you know! I know they are for the 165 and 185 alltrac anyways. For the fronts I got these http://www.pdm-racing.com/products/suspensionbars.html (scroll down) which are adjustable. You can also get the miata adjustable links for usd$55 /pair for the rear. Or make your own similar to the ones @ PDM.

06-22-2005, 10:37 PM
Those rear Mercedes ones fit an ST184? Damn thats a nice price. Those allen keys are a bitch.

06-22-2005, 10:48 PM
And the ST185 swaybar fits the 184? correct?

Mr E
06-23-2005, 03:29 PM
The 185 swaybar also fits the ST205. I know this because I have one.

06-23-2005, 07:14 PM
is it smaller in diameter/have a longer moment arm E? Why would you put the 185 on?