View Full Version : No topic, just useless show boating

06-19-2005, 06:10 AM

And here's a 5mb video of my neutral safety switch (:

And while I'm at it, which wires are the driver and passenger window rollup wires coming out of the driver door harness?

06-19-2005, 07:09 AM
pretty cool, was it hard to do the neutral safety switch?

06-19-2005, 07:24 AM
well I broke 3 reed switches, then found great position to put it at but then broke another, so I used another... I fused? that one.. so I replaced it and added a diode.. overall I'd say it was easy todo except for the delicate reed switches.. thank gawd I bought 50 lol

06-19-2005, 07:29 AM
Don't worry, that magnet is epoxy'd down (:
And I was gonna take out that whole assembly and wire brush it down but I didn't feel like taking it apart. My shifter was all nice until I took the knob off and the cover off then it started to rust ):

06-19-2005, 06:10 PM
So give the details.. What reed switches did you use? Um.. How much were they.. How did you wire the switch in.. What does it stop.. the remote starter from getting to the starter relay... or the actual ignition switch from getting to the relay?

Be pretty neat if you set it up so that only the remote starter doesn't have contact with the starter relay when not in nuetral.. atleast that way you wouldn't be by-passing your clutch switch when you are in the car... That'd be a pain in the ass.. get in.. car is in gear and you push clutch down.. won't start.. ooh ya i gotta put the stick in nuetral.. lol

Me... I'm a freak about checking that the stick is in nuetral all the time before I let the clutch up.. I've had to many times when I THOUGHT it was in N.. and I drop the clutch and get whiplash lol.

06-19-2005, 06:14 PM
There is the window diagram.


Later on I will upload a better quality picture.. one you can actually see what the hell is on it.. Or you can just IM me or something and I'll send it over.

06-19-2005, 06:28 PM
I used these reed switches.. $15 (:

I stuck it in 4th gear, put down a magnet where you see in the picture, then where you see the black tape, I put the reed switch there. So only when its in neutral, it makes contact.

I hooked it up to the remote starter's neutral safety input wire, then the remote starter wire went directly to the starter. So you would start it like normal if you didn't use the remote (:

That diagram is hard to read.. whats the color codes for the windows up for ds and ps on the ds side? (: