PDA

View Full Version : stainless hose fitment question



GT4RC
06-07-2005, 04:40 AM
ok, i have a 90 gts, and am planning on swapping to alltrac calipers. what should i buy for stainless lines? are the alltrac and gts lines identical? if not where can i get ones that will work with this application?

thanks

alltracman78
06-07-2005, 05:20 PM
They're all the same.

Adrian Avgerinos
06-07-2005, 05:41 PM
To be honest, I have no idea what is the difference, but the ST185 front brakes are identical in spec to the later GT-S fronts. I would imagine there is some difference in the rears. Call up Goodridge and ask. Part 21075 is the GTS kit and 21072 is the ST185 kit.

I have late model front and rear GT-S brakes with 21075 Goodridge lines currently on my 90 GT.

alltracman78
06-10-2005, 03:01 PM
The lines are no different.
Front or rear.
The rear brakes are the same, too, for the 92 ^

Adrian Avgerinos
06-10-2005, 10:31 PM
The lines are no different.
Front or rear.
The rear brakes are the same, too, for the 92 ^

How can you say that when Goodridge carries two different part numbers and the rear disc brakes and calipers carry different set of part numbers?

The Alltrac hoses are probably longer than the GT-S hoses, but that's only a guess.

GT4RC
06-11-2005, 01:56 AM
well something definite would be nice.... anyone else?

Galcobar
06-11-2005, 02:20 AM
Check the all-trac BGB.

alltracman78
06-11-2005, 03:29 AM
How can you say that when Goodridge carries two different part numbers and the rear disc brakes and calipers carry different set of part numbers?

So you're saying they have different part #s for a 92 GTS and a 92 Alltrac rear brakes?
Rotor, caliper, and lines?
Does that sound right to you?

Adrian Avgerinos
06-11-2005, 05:12 PM
So you're saying they have different part #s for a 92 GTS and a 92 Alltrac rear brakes?
Rotor, caliper, and lines?
Does that sound right to you?

That's what I'm saying, champ. The rear brakes on the Alltrac are different than the GT-S.