PDA

View Full Version : 3SGTE Crank Bearings



Nitro_Alltrac
04-19-2015, 02:12 PM
I was wanting to check to see if this is a valid number for the bearing set:

1170463022

If so, is this set available?

Thanks.

FrunkMonkey
04-20-2015, 07:00 PM
That part number is for a 5SFE and are .25mm over sized. Are you wanting oversized bearings? If you are just wanting stock sized main or rod bearings you will have to figure out which "mark" each position on the crank or rods have. The numbers can be 1-5 and can also depend on which journal they are on. Refer to the BGB for where the numbers are located.

-Tracy

Nitro_Alltrac
04-20-2015, 10:05 PM
Thanks. I'm looking for stock size bearings.

I got that number from a another dealer site and wanted to check with you first.

Luni
04-21-2015, 06:08 AM
11071-88360-01 mark 1, no.3
11071-88360-02 mark 2, no.3
11071-88360-03 mark 3, no.3
11071-88360-04 mark 4, no.3
11071-88360-05 mark 5, no.3
11701-88342-01 mark 1, no.1, 2, 4, 5
11701-88342-02 mark 2, no.1, 2, 4, 5
11701-88342-03 mark 3, no.1, 2, 4, 5
11701-88342-04 mark 4, no.1, 2, 4, 5
11701-88342-05 mark 5, no.1, 2, 4, 5

BEARING SET, CRANKSHAFT 11704-88361 U/S 0.25 (.25 oversized)

Those are all the possible part numbers for your bearings based on your cap numbering. So find your numbers, then order the correct ones :)