PDA

View Full Version : "THE BLACK" ???



buffalohunter7321
02-08-2015, 08:29 PM
Another question. What does the two vacuum hoses hook to from the turbo sensor??

4thgenceli
02-10-2015, 08:28 PM
On the 215 one connects to the wastegate actuator and the other to the intake manifold behind the throttle body.

Shadowlife25
02-11-2015, 12:05 AM
On the 215 one connects to the wastegate actuator and the other to the intake manifold behind the throttle body.

Same on the 185

buffalohunter7321
02-11-2015, 04:24 AM
This is for a st165. I am assuming it is the same!!!

4thgenceli
02-11-2015, 04:47 PM
Yeah it should be. Let me look up some vacuum diagrams and see for sure.

buffalohunter7321
02-11-2015, 08:40 PM
Sound good to me.

4thgenceli
02-11-2015, 09:32 PM
Here's a link to the vacuum routing of the st165 (http://www.ourlewisfamily.net/toyotaImages/ST165_VacuumRouting.png). Does this help?

buffalohunter7321
02-12-2015, 12:56 AM
Not really. The turbo sensor is on the back of the engine connected with a round squeeze thing that is bolted to the block down near where the oil pan joins to the block near the bell housing of the trans axle. You probly know this already.

I have the same print out from Alldata, but can not find what the turbo sensor hoses connect to !!!

I could look and see on my other trac, but it is too cold out side in Ohio right now to jack it up and take the E & W support off to just be able to see the sensor. This is why I am asking for help from this site, so I can do it a little at a time while it is cold with out being frozen to the ground.

If you find some thing PLEASE feel free to send it to me. As soon as I get this together I will make sure to come and let you drive "THE BLACK".

4thgenceli
02-12-2015, 02:42 AM
I'll take a closer look at the diagrams and see if I can find something that'll help. I have access to all of those fun nifty FSM images from Toyota.

buffalohunter7321
02-12-2015, 03:45 AM
I'll be waiting.