View Full Version : st165 hub/bearing question

12-23-2014, 04:05 PM
So, I am about to try and replace the front bearings on my alltrac and I am going to assume that my hub is damaged also.

Is this all I need for bearings and seals?
2x https://www.rockauto.com/catalog/moreinfo.php?pk=1117003&cc=1273991

2x https://www.rockauto.com/catalog/x,carcode,1273991,parttype,1860
I assume just ordering 2 kits that have the inner, outer and retainer.

Can I use these hubs potentially? Not concerned with ABS functionality as that will just have the fuse pulled anyway.



(I am just assuming my hubs are toast) Also, are the bearings the same between the trac/celica/camry?

One hub specifies alltrac, while the other says celica and camry. Not sure if they are different.

Thanks for any input.

12-24-2014, 01:47 AM
Lemmi do some remembering. The 165 I bought has toasted hubs all around and it seems like what I found was the 165 is different from everything else. I'll get back to you soon

12-24-2014, 01:50 AM
Check out this when I asked Lithia about them

Part number 43503-32020 for the hub shows to fit several Camry's so maybe the ebay ones will actually work.

If it'll help I can take my hubs off again and measure stuff. Mine fall right apart because the bearings are toast and damaged the hub as well so it's an easy job lol

12-24-2014, 02:50 AM

Think you are right. This site leads me to believe that the part is from a Camry or Celica, with ABS, then it will work. Very promising.

12-24-2014, 03:24 AM
I know, sometimes my awesome exceeds even my own expectations

12-24-2014, 03:42 AM
Well, since I can't say with the most confidence that the ebay ones will work, I will get the bearing and seals from rock first and just see how my hub is.