PDA

View Full Version : st165 hub/bearing question



UtahSleeper
12-23-2014, 04:05 PM
So, I am about to try and replace the front bearings on my alltrac and I am going to assume that my hub is damaged also.

Is this all I need for bearings and seals?
2x https://www.rockauto.com/catalog/moreinfo.php?pk=1117003&cc=1273991
(https://www.rockauto.com/catalog/x,carcode,1273991,parttype,1672)

2x https://www.rockauto.com/catalog/x,carcode,1273991,parttype,1860
I assume just ordering 2 kits that have the inner, outer and retainer.


Can I use these hubs potentially? Not concerned with ABS functionality as that will just have the fuse pulled anyway.

http://www.ebay.com/itm/Front-Wheel-Hub-Bearing-Repair-Kit-Pair-Set-for-Toyota-Celica-Camry-/370944194025?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1988%7CModel%3ACelica&hash=item565dff35e9&vxp=mtr

or

http://www.ebay.com/itm/WD-Express-397-51045-630-Front-Hub-/381056241681?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1988%7CModel%3ACelica&hash=item58b8b8d011&vxp=mtr
(I am just assuming my hubs are toast) Also, are the bearings the same between the trac/celica/camry?

One hub specifies alltrac, while the other says celica and camry. Not sure if they are different.

Thanks for any input.

CollapsedNut
12-24-2014, 01:47 AM
Lemmi do some remembering. The 165 I bought has toasted hubs all around and it seems like what I found was the 165 is different from everything else. I'll get back to you soon

CollapsedNut
12-24-2014, 01:50 AM
Check out this when I asked Lithia about them
http://www.celicatech.com/forums/showthread.php?58693-1988-Celica-All-Trac-Front-Hubs

Part number 43503-32020 for the hub shows to fit several Camry's so maybe the ebay ones will actually work.

If it'll help I can take my hubs off again and measure stuff. Mine fall right apart because the bearings are toast and damaged the hub as well so it's an easy job lol

UtahSleeper
12-24-2014, 02:50 AM
http://oemparter.com/oem-parts/4350332020.html#region=europe&group=726659298

Think you are right. This site leads me to believe that the part is from a Camry or Celica, with ABS, then it will work. Very promising.

CollapsedNut
12-24-2014, 03:24 AM
I know, sometimes my awesome exceeds even my own expectations

UtahSleeper
12-24-2014, 03:42 AM
Well, since I can't say with the most confidence that the ebay ones will work, I will get the bearing and seals from rock first and just see how my hub is.