View Full Version : More Mr2 Part Numbers needed

10-19-2014, 09:45 AM
Im looking for the part numbers for the 2 insulated hoses from the heater lines to the engine, the 2 main coolant hoses up to the engine (pass side is L shaped, driver side is slightly bent, but mostly straight.

Im also looking for the part numbers for the 2 different size of hose clamps in there. Theres big ones, and small ones.

I also need the PN for the banjo gaskets for the turbo feed line from the block, on a Gen3. They are smaller than the ones on a Gen2.

Also the crystal matrix jdm oil filter part number. I never can remember that one.

10-21-2014, 04:56 PM
Three mainheater hoses in eng. comp-
87245-17240 HOSE, WAT
87245-17230 HOSE, WAT
80636-18717 87208-170- attached to metal pipe, u shaped. can be cut off and replaced withthis one.

Three main coolant hoses from pipes to engine-
16576-74010 HOSE, RAD
16571-74140 HOSE, RAD
16558-74010 HOSE, RAD

90467-34004 CLIP Biggins
90467-28007 CLIP Littlins

90915-10004A OIL FILTER

Banjo gaskets-15526-88480, This is not a US part number. You will have to improvise and find something that works


10-22-2014, 07:47 AM
Damn man this is gonna kill me.

Ok, I need something else. I need the little key thing that goes between the mechanical speedo sensor, and the electronic cruise control piece. Also, gimme the PN for the pinion gear, the c-clip, and the key that goes between the pinion gear and the elbow piece.

I also need the PN for the exhaust manifold nuts, the manifold to turbo nuts, and the turbo to downpipe nuts.

Thanks man.

10-22-2014, 06:49 PM
So what your saying is you need some nuts? HAHA!


90179-10094 NUT-manifold to turbo and down pipe.
90179-10066 NUT-turbo to manifold
83798-17010 KEY, SPEE
33403-19406 GEAR SUB-w/c-clip
83798-20020 KEY, SPEE

10-23-2014, 06:15 AM
Got any discount codes running right now?

I got a pretty hefty costing cart right now. Any help I can get would be awesome.

10-24-2014, 04:54 AM
Order 31694004 made. Take good care of it buddy! Thanks for all you do!

10-26-2014, 03:29 AM
Poop in the box

10-27-2014, 06:07 PM
I would never do that! I might however include some "kitty roca" in the box.

10-27-2014, 06:08 PM
No kitty roca. Ill poop on your parts counter next time Im in Springfield if you do that. :p

10-29-2014, 02:17 PM
Better bring a step stool. Not sure you could actually hike yourself up there! :P

10-29-2014, 08:50 PM

So I got my parts today.

Question. In the past the 2 heater hoses have been covered with heat wrap to protect them. In this order, I had specified I wanted both, and I got what I think are both of them, but only one of them is heat protected. Is this a mistake, or has the part changed, or what?

10-30-2014, 03:49 PM
Thats the way they are. Just checked the others we have in stock and they are the same.


10-30-2014, 07:53 PM
Interesting. I wonder why no more heat wrap on the one... Ok, well Ill run it.