PDA

View Full Version : [st162] s54 swap



fenrirjk
05-12-2014, 01:05 AM
Hi guys,

My friend is trying to swap a s54 trans in my st162.

I thought I ordered the right parts until I noticed the st202 pressure plate won't fit my fidanza flywheel.

My mistake: I ordered a st165 fw where I should have ordered a 5sfe flywheel.

So I will try to find a st165 pressure plate, but will the st202 to bearing work with it ?


Thanks for your help.

andy
05-14-2014, 04:34 PM
Yea it should be not problem. I did a 3s into a 91 w/s53 and used 3sgte flywheel/pressure plate and a s53 clutch disk

fenrirjk
05-15-2014, 09:32 AM
Thanks andy for your answer.

I noticed that they changed the model of Throw Out Bearing (aka Release bearing) during the st182 production.
Do you know what's the difference between those ? Can I fit the later one on my ST162 ?

P.S. I tried to post links of the bearings, but I'm not allowed as my account is not yet 7 days old ...