PDA

View Full Version : Colt Cams



muscle_bound89@Live.com
07-09-2013, 10:24 PM
So I saw on coltcams.com to have cams regrind and add bigger lobs about 325 bucks which is dirt cheap compared to other aftermarket cams.

for the 5sfe motor on webcamshafts they are 800 bucks for regrinds which is too expensive.

what else in head work would need to be done. other than port and polish

I read in a thread somewhere that you can use mark 5 supra springs and valves or ones from the GT4 All trac motor. over size 1mm springs. deffinatly would like to see how this would turn out.

if anyone has done it let me know.