View Full Version : 1993 Clutch Changeout Questions

06-11-2013, 01:41 AM
Replaced my clutch this weekend with a Clutchmasters stage 2 clutch that was supposed to be 25% greater holding power and a Kevlar pad. Had a Fidanza 10# flywheel, which I mounted also. I also replaced the slave cylinder and hose, which I upgraded to a ss braided line.
1. The clutch pedal feels lighter than my old one, which is puzzling.
2. The clutch engages to fast from off the floor, can this be adjusted.
Any feedback would be helpful.

06-11-2013, 08:07 AM
1, not really, it could have a grippier material instead of a super stiff plate.
2, not really, you might be able to adjust the pushrod a little bit but that's pretty indicative of a new clutch. It's old worn clutches that engage at the top.

06-11-2013, 11:26 PM
There is also a longer slave cyl rod that supposedly helps with this, from SpeedSource IIRC.

06-12-2013, 03:46 AM
Adjust the clutch pedal....

And extended slave rod helps