PDA

View Full Version : Replacing oil pan gasket ( 5sfe )



Ads28
05-15-2013, 02:42 AM
Well among one of my many issues ... A annoying oil leak is one of them... I've traced one part of the problem to the oil pan gasket ... Mainly the edge right next to the trans , under the engine cross memeber ... Soo seeing as I have the best days off ever ( midnight shift with Wed Thurs off ) I figured I'd tackle this issue

Jack up the car
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsd5abb524.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsd5abb524.jpg.html)

Remove both engine cross members ( be sure to support engine / trans in some way to make removal easier )
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsb4d9fe68.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsb4d9fe68.jpg.html)

Look at all the room u have now
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsa08f5e33.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsa08f5e33.jpg.html)

The culprit
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsc4bd4eea.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsc4bd4eea.jpg.html)

I ran outta beer so that's as far as I got for now had to get fresh case in the fridge before they closed ...good to go for couple more hours ..

Galcobar
05-15-2013, 03:07 AM
Toyota doesn't use a gasket, per se. The oil pan is sealed with Toyota's Form-In-Place-Gasket, if you have that on hand -- though of course an aftermarket gasket can work.

Ads28
05-15-2013, 04:51 AM
Yes indeed they do FIPG 103
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsd0cdd30b.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsd0cdd30b.jpg.html)

Next you'll want to drop the front piece of your exhaust outta the way
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zps42520622.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zps42520622.jpg.html)

Then there's a shield ? Support ? Thing blocking one of the pan bolts

http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpse8290ed4.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpse8290ed4.jpg.html)

And 19 bolts later she's ready to come down ... I found this is a good way to break her lose from the sealant

http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsea5ff209.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsea5ff209.jpg.html)

And then success
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zps95268834.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zps95268834.jpg.html)

Nothing stuck to the pickup ... No foren material in the pan 😊
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zps406c6edf.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zps406c6edf.jpg.html)

Now you can definitely see where the sealant got smeared out if the way not really doing its job
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsc9696ab6.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsc9696ab6.jpg.html)
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zps5e3289d7.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zps5e3289d7.jpg.html)

Now for clean up I had this handy drill attachment ( leant out my dremel or I'd use that )

http://i31.photobucket.com/albums/c392/Imprezaluver/image_zps2d81d8c2.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zps2d81d8c2.jpg.html)

All Purdy and clean
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsc4a804c3.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsc4a804c3.jpg.html)

Now it's off to the Coin op with a bottle of super clean to clean up all the cross members / misc parts

Ads28
05-15-2013, 03:28 PM
Beers won ... Time to finish her up on this lovely morning (first day above 20'C )

Might as well throw a fresh coat of paint on her while your there
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsad861321.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsad861321.jpg.html)

Luni
05-15-2013, 06:13 PM
Good write up.

Ads28
05-15-2013, 08:36 PM
Everything else is pretty straight forward ... Seal up the pan and reinstall everything
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zps792f5cb5.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zps792f5cb5.jpg.html)
Finish it off with a genuine yota filter
http://i31.photobucket.com/albums/c392/Imprezaluver/image_zpsf1c4c6c3.jpg (http://s31.photobucket.com/user/Imprezaluver/media/image_zpsf1c4c6c3.jpg.html)

Fill it up ... Run her and check for leaks

Ads28
05-15-2013, 08:37 PM
Good write up.

Thanks.. Always try n take pics of everything I do to help others in the future

93celicaconv
05-16-2013, 03:15 PM
Were you successful (no more oil weeping in and around that particular area)?

I had a very minor pan leak on my 93 vert. Was going to replace lower bearings & oil pump, so did all that at one time. Previous owner got her sludged up a fair amount - had to hot tank everything to get everything out. Primed & painted the pan with engine enamel. Turned out great. Hope you get the same results. Your bottom half of your engine sure looked good & clean - very encouraging that your engine is in great shape.

Ads28
05-16-2013, 04:31 PM
Thanks yup no more leaks around that area. She still leaks from up top..distributor has a small one , and then maybe back of valve cover ? now time to zero in on those

jdm_celica_gts
05-17-2013, 01:09 AM
I had to do this not too long ago. Cleaning all the old gasket off is key to getting a good seal when reinstalling the oil pan.