PDA

View Full Version : wheel spacers



jdm_celica_gts
11-26-2012, 05:10 AM
St185. 6th gen gts rims. 15x7
What size of spacers would I need to make the rims more flush to the fenders?
5 mm in front 25 in the rear?

Nitro_Alltrac
12-07-2012, 04:41 AM
Depending on the offset, the 25mm in the rear should work fine. That's what I've got on the back of mine. Mine had a thin spacer on the front, maybe 5mm, when I got the car but I took them off and I thought the front looked fine.

jdm_celica_gts
12-08-2012, 05:38 AM
Thanks for the response, it seems a lot of people get 25 mm in the rear, that's probably what I will go with

david in germany
12-09-2012, 09:56 PM
I have a pair of 45mm in the garage. :)

jdm_celica_gts
12-10-2012, 04:51 AM
That seems like a bit of overkill haha

david in germany
12-10-2012, 10:35 AM
That seems like a bit of overkill haha

For my 91 st it set the stock wheels just under fluh. Had maybe 4mm overhang from the quarter pannel

Luke
12-11-2012, 09:41 AM
I'd buy them off you if you were in Australia :p

david in germany
12-11-2012, 06:55 PM
Send me your address and I will get an estimate for shipping. :)

Luke
12-12-2012, 02:18 AM
Neroli street, Palmwoods. Queensland Australia. Post code 4555 :p

david in germany
12-12-2012, 06:43 AM
Ouch!, flat rate box would be around $47 US. :(

Luke
12-12-2012, 12:42 PM
Bummer! Depends how much you'd want for them too I guess!

Luke
12-19-2012, 08:09 AM
Daaaavid? :p

david in germany
12-19-2012, 10:23 PM
Got your pm. I was looking for around $85 for them.

david in germany
12-19-2012, 10:24 PM
Got your pm. I was looking for around $85 for them.

I need to get a stud back into one of them though.

Luke
01-01-2013, 01:12 PM
$120 posted?

david in germany
01-01-2013, 01:15 PM
I can probably do that. Let me get the stud from Toyota in the next day or so first. I want them to be ready to bolt on if you buy them.

Luke
01-01-2013, 01:23 PM
Thanks David :)

david in germany
02-07-2013, 02:17 PM
Thanks David :)
Luke, just got notification that the stud I ordered has been shipped. I will let you know when I get it.

MrMcQuacker
03-19-2013, 10:41 PM
GL hope it all works out for ya. Post some pics when you can :)