PDA

View Full Version : How to build a resistor pack?



Hookecho
09-27-2012, 01:28 AM
The fuel injector resistor pack for my motor is out of spec. Being that these things are quite hard to find I want to build a new one.

Can someone tell me how to go about it?

I need to know which resistors to use. The injectors are 4 ohms and i believe the resistors can't exceed 6 ohms being that the BGB states that the injectors should ohm out between 4-6 ohms. They have to be able handle the temps in the engine bay. How to encase them. I'm planning on using the plug from my current resistor pack and use new wires.

Luni
09-27-2012, 02:12 AM
http://www.mr2oc.com/showthread.php?t=276788&highlight=build+injector+resistor+pack

vip09
09-27-2012, 06:14 PM
I have a couple laying around. Don't need them. Cover shipping and you can have them. Removed from running vehicles with no issues.

Carolina91GT-S
04-06-2013, 10:17 PM
http://www.celicatech.com/forums/showthread.php?40611-DIY-Fuel-injector-resistor-pack-for-the-3SGTE&highlight=

I made mine...here is how

I know this is an old thread but I thought it was appropo

~Chris