PDA

View Full Version : help hooking reverse glow gauges up??



hmercier1714
05-29-2012, 06:42 PM
i am trying to figure out where to hook my reverse indiglow gauges up. i dont necessarily want to splice alot of wires in the car,,, for example my cig lighter... so im just wondering where is the best place to hook my wires up for my gauges. i have them installed in the dash already just not all wired up just yet...if you could spare some advice it would be greatly appreciated...maybe where you hooked up your wires...?

Eric Barrera
05-30-2012, 12:32 AM
I made a distribution block and ran a 8 gauge wire straight from the battery too the block. From there I plugged in my 3 Gauges *Water Temp, Oil Pressure, and Volt*

Smaay
06-06-2012, 09:52 PM
are you talking about reverse overlay gauges? get a 12V tester from autozone for 5 bucks and test the plugs feeding the gauge cluster. there is a white one and a blue one. just test each wire turning the lights on, then use that. you can use any metal for a ground point.