PDA

View Full Version : trouble installing coolant hoses



munib666
05-01-2012, 02:50 AM
I have a trouble installing coolant hoses, I swiped GTS motor on celica GT 2004, now Im not sure where couple hoses go, and It doesnt have a coolant circulation, after motor been running a lot of coolant comes out of coolant reservoir I was wondering whats worng, coolant does not over heat,but the heater dont work so It means no coolant circulation

I didnt try to take thermostat out yet


Celica GTS 2004

jaydog82
05-01-2012, 11:13 PM
We need more info on the car, was the motor rebuilt? It could be a hg problem, is the heater hooked up? Was the water pump replaced? Ect

Sent from my HTC Sensation XE with Beats Audio using Tapatalk

munib666
05-02-2012, 03:40 AM
I put GTS 2004 Motor on Celica GT 2004, I swaped whole motor, heater is hooked up. If you sqeese radiator lower hose then water goes to engine and Heater works. so definetly no water circulation, water pump was never touched

Smaay
05-02-2012, 04:03 AM
if the heater is working then you have circulation. did you read my guide?