PDA

View Full Version : Changing Low-Beam Bulbs



RickyNo
04-28-2012, 07:22 PM
Hi guys, first burned low-beam bulb this week. I bough a new pack of 2 to change them both but... But after trying and seeing the spring holder screw so well hidden down on the outer side, I wonder how one can unscrew it...

Do I need to completely remove the headlight to be able to change it?
Meaning I also need to remove the front bumber??? :squint:

T-spoon
04-29-2012, 03:10 AM
Is there even a screw that you need to remove? Should just be a metal clip that you unhook and it should swing out and allow you to slide the bulb out... unless they used an entirely different setup than is on the MRS, which I suppose is possible, but would surprise me.

CriScO
04-29-2012, 07:11 AM
Is there even a screw that you need to remove? Should just be a metal clip that you unhook and it should swing out and allow you to slide the bulb out... unless they used an entirely different setup than is on the MRS, which I suppose is possible, but would surprise me.
^ Ding ding, we have a winner. The clip unhooks and swings out.

RickyNo
04-29-2012, 07:01 PM
Thanks, I figured it out when I had a second look.
The space to work is so tiny with the fender well.

Smaay
05-02-2012, 04:05 AM
its much easier to take out the headlight, but yes there is a spring in place that holds the bulb in

v3
05-02-2012, 08:06 AM
Get yourself a mirror on a stick.....you will be using it a lot.