PDA

View Full Version : 3sge vac hose stuffs



CollapsedNut
04-16-2012, 01:58 AM
Hose G in these pictures(not my pics). It comes off the manifold and goes down behind the engine then back up to the underside of the intake just behind the AFM. WTF is this for?!

http://i228.photobucket.com/albums/ee111/st165-2765/dirty%20deeds/120407i.jpg
http://i228.photobucket.com/albums/ee111/st165-2765/dirty%20deeds/120407m.jpg
http://i228.photobucket.com/albums/ee111/st165-2765/dirty%20deeds/120407n.jpg

In this picture, hose F, I do not have a T there for this hose to go on along with the above hose G... I have a 90* elbow coming off the intake manifold, so only one hose can connect here. Ideas?
http://i228.photobucket.com/albums/ee111/st165-2765/dirty%20deeds/120407d.jpg
http://i228.photobucket.com/albums/ee111/st165-2765/dirty%20deeds/120407a.jpg

schnee
04-28-2012, 12:06 PM
Hose G only appears on motors with Exhaust gas Recycling - EGR
JDM's do not have it and I think it's function is to dilute the smog in the manifold which has been sucked from the exhaust
JDM's also have smaller injectors than EGR cars as there's less smoke to re-burn

Yeah, Daves pics are awesome as usual

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Toyota%20Celica/162%20TEMS/2012-02-26_18-09-19_101.jpg

mines betta:loco: