PDA

View Full Version : Side Feed Manifold



Night_Wolf
04-09-2012, 04:03 PM
So I finally got around to putting the 3SGE side feed manifold onto my gen 2 3SGTE. I ran into a problem with the throttle body from the top feed manifold because the throttle cable hooks onto it differently than the way it should be with the side feed, is there a different/aftermarket throttle body I can bolt up to it? (I apologize if it doesn't quite make sense, I'll try to get picks up later)

4thgenceli
04-09-2012, 04:06 PM
The cable doesn't reach?

vip09
04-09-2012, 05:12 PM
I used one from a camry. It was the perfect length.

UtahSleeper
04-09-2012, 06:57 PM
Everything I have heard says it just works. The stock cable may be too long for cosmetic reasons.

Night_Wolf
04-09-2012, 09:32 PM
Everything I have heard says it just works. The stock cable may be too long for cosmetic reasons.

The cable will work its just the throttle body, on the top feed it pulls the butterfly valve forward (away from the manifold) and on the side feed it looks like the throttle cable should pull the butterfly valve towards the manifold (Im using the TB from my Top feed on the side feed I'll snap pics tonight)