View Full Version : Anyone have the 5th gear remover/replacer SST?

03-03-2012, 04:55 AM
SST 0931017010 (0931007010, 0931007020,

I'm done, I gave up with the socket/hammer method. It's to the point where I have to hit it hard enough that it pops the springs out of place :doh:

03-05-2012, 06:54 AM
You don't need an SST to get 5th gear off. I used the following pullers and got 5th gear off no problem.

You need a harmonic balancer puller:


And a steering wheel puller:


03-05-2012, 04:35 PM
I ghetto rigged it and was able to convert my puller into a press.

I have a 3 jaw puller and a harmonic puller as well. I couldn't get my synchro/clutch hub back on the shaft. It would go so far and then stop. Rand down to the hardware store, bought 4 nuts and a bolt and converted it into a press.

Also would of helped if the retaining clip was in the right place (which was causing me the grief all along).

03-05-2012, 06:52 PM
I have the tool.

It makes the job a whole lot easier.

03-06-2012, 12:27 AM
where do you get the synchronizer ring for the 5th gear?
im doing my transmission too

03-06-2012, 08:49 AM
From the dealership.

03-06-2012, 03:00 PM
do you know the part number? the guy who worked at parts service department doesnt know what im talking about