PDA

View Full Version : St165 Swaping over st185 turbo manifold and etc?



MrMcQuacker
02-12-2012, 04:55 AM
Hello People. I've seen it before but i can't find it anymore? I would like to know, If anyone can point me to the right direction. I am thinking I have a friend with a st165 motor and i have 2gen parts as spare. I was told it can be done with slight mods. What has 2 be done? Also Can Cams be swapped over 2? With slight mods if needed or they just don't work at all?

4thgenceli
02-12-2012, 05:02 AM
The st185 is a bolt on to the st165 for the exhaust manifold. It's actually a good upgrade for the st165 motor, twin entry turbo instead of a single entry.

MrMcQuacker
02-12-2012, 07:14 AM
I was told that its not interchangeable. Because they are different Bolt Pattern. Unless I heard wrong. Also what about the Cams?

shreddr69
05-29-2012, 12:15 AM
Nope, they bolt right up

saved_1992
05-29-2012, 06:41 PM
how to install 2nd gen manifold/turbo into a 165

http://www.alltrac.net/phpBB2/viewtopic.php?f=49&t=2136

cams will not swap

shreddr69
05-29-2012, 09:22 PM
but the exhaust will....

jaydog82
05-30-2012, 03:34 AM
Exhaust will bolt up to the head, but the bolt pattern on the Dp side of the turbo is different. You will need a gen 2 Dp to make it work.


Sent from my HTC Sensation XE with Beats Audio using Tapatalk