PDA

View Full Version : Resistors



muscle_bound89@Live.com
02-11-2012, 06:13 AM
Just put SMD and LEDs in all my lights the turn signals are buzzing and not blinking so i found I need resistors on them.

what is the easiest way to wire them up. im thinking just splice into the wire and wrap the resistor wires around the wires going to the bulb socket and wrape with electriacl tape.

open for sugestions

temperacerguy
02-14-2012, 05:15 AM
when wiring do not "loop, twist, and tape" That's just asking for breaks/shorts/wire fires.

at the minimum use crimp connects, but I would recomend soldering and shrink wrap.

Just remember, those resistors get REAL HOT.