PDA

View Full Version : 93 GTS System 10 factory amp pigtail



waycool
01-30-2012, 06:12 PM
Does anyone know if there is a plug adapter out there that will plug into the speaker plug on my factory amp so I can have some wire ends to tie into my new amp. Instead I am going to have to cut the plug off and splice/solder on wire extensions. Any help is appreciated.

NYTEPSYCE
02-01-2012, 07:28 AM
I am not quite sure, but if you follow the speaker plug further in, there is a connector that you can remove and then get an adapter to use with an aftermarket stereo. There is a sticky on this site about installing an after market system on 1990-1993 Celicas.
Nytepsyce
THE NIGHT IS CALLING YOU

crymson
02-01-2012, 10:10 AM
You're talking about the one under passenger seat, right? I never found one, but I made one by taking my stock amp apart, which it turned out was more of a pita then just splicing and running wire.

This post is your friend
http://www.celicatech.com/forums/showthread.php?34996-How-To-Aftermarket-Stereo-Amplifier-into-System-10-equipped-Celica&highlight=system+10

waycool
02-03-2012, 02:11 AM
Thanks for the info. I am going to cut the plug off and solder pig tails onto them so I can reach my amp.

tom1977
02-05-2012, 06:28 PM
That is how we always did it in stereo shops as well. No adapter unless crutchfield or metra sells one that I am unaware of.