PDA

View Full Version : intake manifold bolts



fullmonte44
10-12-2011, 03:11 AM
Was looking at my 87 ST for a surging idle. Looks like previous owner forgot to bolt up the intake. Was just hanging by the two studs on the ends. Got some nuts on them. But what size are the intake bolts-looks like 8mm, but how long? And, pitch? 1.25? Thanks, guys.
Local toyota place couldn't help- just showed me where 4 bolts go and the two studs. Sd he had no way of knowing, with none in stock. Was a little surprised it was still running. My dogged daily driver. lol

4thgenceli
10-12-2011, 02:55 PM
Your local dealer is a fuckwad. Hit up lithia Toyota. They are a vendor here and can help out. I can post the part numbers when I get to the office


Sent from my iPhail

klapa
10-12-2011, 04:14 PM
I have the same problems to figure out the part numbers of bolts, nuts, and other fasteners.

Toyota DIY does not have illustrations, and all such fasteners are just listed as "standard parts" with no quantity so it is nearly impossible to figure out which number is for what part.

4thgenceli
10-12-2011, 04:34 PM
So for the '87 ST.

Intake/exhaust manifold studs.
92122‑60825 (x2)

Intake/exhaust manifold nuts (for the above studs)
90179‑08044 (x2)

Intake/exhaust manifold bolts
91611‑60825 (x6)


http://ourlewisfamily.net/diag_AyDOjF.jpg