PDA

View Full Version : Subaru Axle



Night_Wolf
09-26-2011, 04:57 PM
So Friday I'm going to be doing the axle on my friends 95 Impreza LX, I know with the Celicas its basically pry the drivers side axle out and make sure the open C on the C-clip is down, anyone ever done an axle on one of these AWD babys and got any good advice

The Captain
09-26-2011, 09:48 PM
Yes, there is a set pin on the inside (trans side) of the axle. You cannot pry these axles out!!!! U need the correct size punch to get it out. You have to drive it all the way out. I have a fresh rebuilt driver side axle for a 2000 outback if it'll fit in my basement.

Night_Wolf
09-27-2011, 01:03 PM
Yes, there is a set pin on the inside (trans side) of the axle. You cannot pry these axles out!!!! U need the correct size punch to get it out. You have to drive it all the way out. I have a fresh rebuilt driver side axle for a 2000 outback if it'll fit in my basement.

If what'll fit in the basement exactly lol?

The Captain
09-27-2011, 08:41 PM
exactly!

Hipster Lawrence
09-27-2011, 11:00 PM
Easyiest axles ever. Just gotta got that hole to line up going back in.

Night_Wolf
09-27-2011, 11:20 PM
Easyiest axles ever. Just gotta got that hole to line up going back in.

Well see how the easiest axles ever pans out with years and years of salt up in the Great White North JR

Night_Wolf
09-29-2011, 03:25 AM
Btw, can I just re-use that "set pin?"

Grot
09-29-2011, 03:50 AM
i dont see why not.

its just a pin in a hole i assume.

The Captain
09-29-2011, 12:33 PM
Usually the new axle comes with a new pin.