PDA

View Full Version : custom energy drink coolant over flow bottle writeup



jaydog82
06-03-2011, 04:47 PM
so i tried to find the coolant overflow bottle for my ST165, but could not so i decided to make one.
i have not yet tested the effectiveness of this design DO AT YOUR OWN RISK

things you will need
1. a 10mm wrench or scocket to remove the old bottle
2. an energy drink of your choice
3. some 1/4 inch hose(i think)
4. a wiper fluid bottle cap like this one ( part number 54100 from oreilly auto parts)
5. a bicycle water bottle holder
6. some rtv and paint of your choice (for the bottle holder)

the old bottle
http://i469.photobucket.com/albums/rr54/jaydog82celi/CopyofIMG00878.jpg

the new energy can
http://i469.photobucket.com/albums/rr54/jaydog82celi/CopyofIMG00885.jpg

the washer lid
http://i469.photobucket.com/albums/rr54/jaydog82celi/CopyofIMG00887.jpg

1: drink energy drink :)

2: start by removing the old bottle (keep the bolts you will reuse the small one)

3: bend out the rim on the top of the can, then add some rtv to the inside lip of the ridge, attach a piece of hose to the down spout of the lid (make sure it is the right length, just above the
bottom of the can), rtv the little holt in the lid and rtv the lid to the can.

4: paint bottle holder if needed and attach it by the top hole to the right side hole of the expansion tank by using the smaller bolt removed earlyer.

5: install energy can and attach hose(you will need to use a smaller clamp or wrap the tube on the cap to make up the difference in size from the expansion hose)

Enjoy

the finished product
http://i469.photobucket.com/albums/rr54/jaydog82celi/CopyofIMG00889.jpg

i have not yet tested the effectiveness of this design DO AT YOUR OWN RISK

jaydog82
06-03-2011, 04:48 PM
so now my car runs on NOS lol

MCcelica
06-03-2011, 07:26 PM
Its... a little ghetto... but I guess just let us know how it holds up.

v8killer
06-03-2011, 07:38 PM
idc how ghetto it is i think its f'n sick! i will do this in a week or so

jaydog82
06-03-2011, 07:40 PM
ya its a little ghetto, but i love it lol

v8killer
06-03-2011, 07:45 PM
it will last longer than a plastic one and i can be painted black to look somewhat stock, i give this a solid 9.5/10 it would be a 10/10 if the cap fit directly on the can.

jaydog82
06-03-2011, 07:48 PM
ya it was a little to loose and i wanted it to seal, i will be looking for a better fit and will update if found.

v8killer
06-03-2011, 08:05 PM
nice, yeah let me know i will ask my gf if she knowsof any suggestions

celicasilfee
06-03-2011, 08:22 PM
I saw a rat rod at a local car show this week that did this with a large Jack Daniels bottle. Looked sick!

jaydog82
06-03-2011, 09:11 PM
nice

Sopaynefull
06-03-2011, 10:43 PM
I love the fact that you can now tell everyone your car has NOS. Excellent choice. Plus- consuming the drink first gave you energy to finish the project!