PDA

View Full Version : Part number list



T-spoon
05-01-2011, 06:40 PM
Hey, I have a lengthy list of items I need part numbers for if possible. This is all for an OBD1 USDM 2JZGTE (don't know exact year):

Cam seals
Front Main seal
Rear Main seal
Valve cover gaskets
PCV hoses (small between valve covers)
Lower runner to upper intake manifold gasket
Water pump (whole kit) maybe 16100-49846?
Short Metal pipe and O'rings that fit into top of water pump
Water pump pulley and bolt if separate
Thermostat and gasket
Timing belt
Timing belt idler pulley
Fuel injector resistor pack
Throttle/accelerator cable
Both power steering lines (w/associated banjo bolts/washers)
Power steering resevoir
Flywheel bolts
Bell housing to engine block bolts
Serpentine belt w/out A/C if you have a listing for that
Upper and lower radiator hoses
Long shot.. but do you have a PN for the 1JZGTE flywheel?
Exhaust manifold gasket(s)

Oh and for an 87 Supra turbo:
Motor mounts
Clutch slave cylinder
Shifter grommet and bushing (black and green flat rubber disc and clear/white bushing)
Injector bushings/grommets/o-rings

Aaron Willis
05-03-2011, 10:27 PM
Finally got that done. Here you go:

90311-40020 - CAM SEAL (2 REQ'D)
90311-46001 - CRANK SEAL, FRONT
90311-90006 - CRANK SEAL, REAR
11213-46020 - VALVE COVER GASKET, INT.
11214-46011 - VALVE COVER GASKET, EXH.
12261-46031 - HOSE, VENT
12263-46010 - HOSE, VENT
12264-46010 - HOSE, VENT
17176-46030 - IAC VALVE GASKET
16100-49847 - WATER PUMP ASSY
90445-12291 - UPDATE HOSE FOR WATER PUMP
16268-46020 - PIPE, WATER BY-PASS
96761-24023 - O-RING FOR WATER BY-PASS PIPE (2 REQ'D)
90916-03093 - THERMOSTAT
16325-62010 - THERMOSTAT GASKET
13568-49036 - TIMING BELT
13505-46041 - TIMING BELT IDLER
28510-46020 - INJECTOR RESISTOR
78180-1B090 - THROTTLE CABLE
44403-14020 - P/S TUBE, PUMP TO RACK
90401-16014 - BANJO BOLT @ P/S PUMP
44327-26020 - BANJO GASKET @ P/S PUMP
90401-16013 - BANJO BOLT @ RACK
44327-12010 - BANJO GASKET @ RACK
44406-14060 - P/S TUBE, RACK TO COOLER
90401-17005 - BANJO BOLT @ RACK
90430-17006 - BANJO GASKET @ RACK (2 REQ'D)
44402-14231 - P/S COOLER
90467-16031 - HOSE CLIP @ P/S COOLER INLET
90080-46355 - HOSE CLIP @ P/S COOLER OUTLET
44360-24042 - P/S PUMP RESERVOIR
90910-02115 - FLYWHEEL BOLT (8 REQ'D)
90080-11426 - BELLHOUSING TO ENGINE BOLT (5 REQ'D)
90119-10260 - BELLHOUSING TO ENGINE BOLT (4 REQ'D)
16571-46150 - UPPER RADIATOR HOSE
16572-46160 - LOWER RADIATOR HOSE
17173-46040 - GASKET, EXHAUST MANIFODL TO HEAD, NO.1
17198-46010 - GASKET, EXHAUST MANIFODL TO HEAD, NO.2
12361-42030 - INSULATOR (MOTOR MOUNT), 7M-GTE
31470-14050 - SLAVE CYLINDER
33505-35020 - SHIFTER SEAT (NOT IN EPC, SHOULD WORK)
33548-31010 - BUSH, SHIFT LEVER
90301-07001 - O-RING @ INJECTOR TOP (6 REQ'D)
90480-13005 - INJECTOR GROMMET UNDER RAIL (6 REQ'D)
23291-41010 - INJECTOR INSULATOR @ HEAD (6 REQ'D)


There is no listing in the EPC for a non-A/C serp belt.

There are several different 1JZ-GTE flywheels depending on model, year, etc. Do you know which one you want?

T-spoon
05-04-2011, 12:55 AM
Thanks a ton, Aaron! As far as the flywheel goes, I'm not really sure. I will be using the R154 with the 7M clutch and pressure plate and 1J 5spd bellhousing and need a flywheel that will mount to the 2J. I would think the one that works would be out of the JDM MKIII 1jzgte w/5spd.. so a 91ish?

Aaron Willis
05-04-2011, 01:01 AM
R154, 7M clutch and pressure plate, 1J 5spd bellhousing... JDM MKIII 1jzgte w/5spd.. so a 91ish?13405-46030 then. That part is on the US parts system (so you can price it on our website) and in stock in US warehouses. We may be able to get it from Toyota, but only if we are very lucky.

T-spoon
05-04-2011, 02:18 AM
Ah, alrighty. Thanks again :)

T-spoon
05-19-2011, 04:50 AM
Hey Aaron, I just ordered that flywheel through the website. If it's NOT available or would take more than a couple weeks to get, please let me know! (I'm sure you would without me asking, but looks like I did anyway, lol)

Aaron Willis
05-19-2011, 05:17 PM
Thanks, we'll do that. We have a request in for it so we'll know fairly soon whether they will be able to honor it ir not, and we'll update you as soon as we hear.