PDA

View Full Version : Robs 86 st162



rev_head
04-27-2011, 03:14 AM
Long time since ive been on here. alots changed so am starting a new thread. After repairing a blown HG to only have a big end fail on me only 4 months later i did a complete rebuild on my motor and re-fell in love with her all over again.
enjoy

heres a mods list of how she sits atm

Performance:
Gen 1 3sge rebuilt with……………
Block- bored, decked, dipped, new welch plugs
Crank- polished, chamfered and balanced
Head- bathed, skimmed, Ported and Port matched
Resized rods
ACL bearings
ARP head studs
TRD 0.8mm Steel Head Gasket
1mm O/S Hypatech Pistons with Hastings rings
New oil pump
New water pump
New thermostat
Gates Timing Kit
All new seals and gaskets
TRD oil cap (lol)

Brass shifter cable bushes (speedsource)
Aluminium shifter base bushes (speedsource)
4-2-1 Extractors
Full 2.25” Zaust
Stiffened up engine mounts
3A racing Pod filter
Custom cold air ducting
Oil catch can
Silicone radiotor hoses (modified 205 ones)
EGR delete
A/C delete

Handling:
22mm Whiteline front sway bar
18mm whiteline rear sway bar
Stock front camber bolts
Monroe gt gas shocks
Super low king springs
Custom adjustable sway bar end links (front and rear)

Rolling Stock:
TRD T3 16x7” rims powder coated white (crazy lightweight)
D1 spec light weight alloy wheel nuts
TRD valve caps (lol)

Stopping:
St185 single Piston front calipers
St185 Front discs
St185 Master cylinder
Semi race pads all round
Braided brake lines all round

Stezza:
Alpine IDX-305 head unit
Alpine Type R 7.5” splits in front
Alpine Type R 6x9”s in the rear
Alpine 4ch amp
No name capacitor

Exterior:
Custom 185 grp.A bonnet
Darkest legal tint all round
Series 2 tails
Blacked out side indicators
Ricey red brakes
Crystal cut headlights
LED parkers

Interior:
Custom front door speaker pods
Custom parcel shelf
Series 2 Black interior
Blue LED guage and dash lighting
Clear door card light lenses
D1 Spec weighted shift knob
Modified shifter
Ricey pedals
Mini shift lamp
Series 2 cup holders
After market steering wheel
Gloss black boot with no trims

Random stuff:
Chassis Tow Plates removed
Sound deadening removed(rear seats back)
Boot trims removed
Aerial deleted
Complete A/C system deleted
Brass shifter cable bushes (speedsource)
Aluminium shifter base bushes (speedsource)


heres the latest pics of her

http://i223.photobucket.com/albums/dd104/rev_head/st162/DSC01352.jpg

http://i223.photobucket.com/albums/dd104/rev_head/st162/DSC01346.jpg

http://i223.photobucket.com/albums/dd104/rev_head/st162/DSC01347.jpg

http://i223.photobucket.com/albums/dd104/rev_head/st162/DSC01348.jpg

going to relocate the battery to the boot then build a cold airbox for the pod coz exposed pods = Fail

and heres a pic of things to still be installed
http://i223.photobucket.com/albums/dd104/rev_head/st162/DSC01379.jpg

http://i223.photobucket.com/albums/dd104/rev_head/st162/DSC01378.jpg

http://i223.photobucket.com/albums/dd104/rev_head/st162/DSC01335.jpg

http://i223.photobucket.com/albums/dd104/rev_head/st162/DSC01334.jpg

4thgenceli
04-27-2011, 03:29 AM
Can I have your hood please?

Or can you come here and make that hood for me?

Jasmine will wuv u long time!

rev_head
04-28-2011, 08:37 AM
Can I have your hood please?

Or can you come here and make that hood for me?

Jasmine will wuv u long time!

you pay for flights amd accomodation and i will lol

Ghost
04-28-2011, 03:30 PM
thats 1 nice 4gen you got there mister.

black_celicagti16
04-30-2011, 01:30 AM
Great job you've done Rob ;)

CollapsedNut
05-02-2011, 02:52 AM
I really like your ride

Rickstar22
05-02-2011, 02:57 AM
Bout time you made it back !!!! Nice ride... give me your spares.... blah, blah, blah.... lol
BTW, seriously, I do need some of those front side indicators.... the bubble ones you blacked out... let me know if you come up with any spares....

rev_head
07-07-2011, 06:54 AM
So have been doing a few thinsg here and there. gave her a service, fitted a 165 g/box cooler as an oil cooler after a bigggggggggg clean out. am converting the interior to black, finally! heres some pics

ok so heres how the engine bay now looks

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4568.jpg

heres the oil cooler, just made up some brackets using some alloy

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4569.jpg

The relocation kit

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4570.jpg

camber tops installed...........YUM lol

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4571.jpg

heres a shot of the black interior and how its coming alonmg, plese excuse the messy state of the carpet

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4572.jpg


Now its time for a treat. time to let the cat out of the bag, well atleast a lil. Going to be working on a fairly massive upgrade over the next month or 2. but it all basically revolves around these lil beauties that arrived today

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4573.jpg

more will be revealed as time goes on. enjoy!

black_celicagti16
07-07-2011, 08:57 PM
I wanna see the ITB's fitted Rob!!!
BTW let me know where you bought the camber tops!

CollapsedNut
07-07-2011, 10:38 PM
I demand part numbers, model used on, ect of every step if your itb upgrade!

rev_head
07-29-2011, 05:49 AM
The throttles are suzuki gsxr 750 01-03 model

heres some updates

some prezzies arrived in the mail for me this week

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4645.jpg

Gen 2 N/A Head and gen 2 na fuel rail

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4648.jpg

BC heavy duty valve springs with titanium retainers

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4646.jpg

part of the gen 2 intake (the only part i need)

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4647.jpg

fitted my AFR guage. i bought it for tuning purposes when i was originally going to use an safc. but will still be very usefel once i have setup the quads and using a stand alone ecu. Just need to weld the bung in the exhaust so i can fit the wideband o2 sensor, atm thats just like a display mode thats showing that reading

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4654.jpg
http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4655.jpg
PS dont mind the whole in the door card, my tweeter is out atm as the backing broke and i still havent re-fitted it after fixing lol

while i was under the dash wiring it in i thought i would FINALLY rip out some of the excess wiring from previous alarm installs and what not.
heres SOME of what i reipped out

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4649.jpg
there was actually alot more then that.

Fitted some gt4 seats............sooooooooooo comfy. need to wire them up still tho. They are in excellent condition but unfortunatley they are blue and i dont have the funds to retrim them at this point so sadly they will get hidden by some seat covers :(

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4656.jpg
http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4657.jpg

my cv's have been getting extremely clnky as of late and considering im very keen to take it back to the drags i figured why fuck around so i bought all new drive shafts.

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4658.jpg

also my vacuum block arrived. cheap ebay special but it'l do the job and it looks nice enough.

http://i223.photobucket.com/albums/dd104/rev_head/st162/IMG_4660.jpg.

Doowstados
07-29-2011, 08:32 AM
That is one sexy ass car. I love the hood and your choice of wheels man.

rev_head
08-01-2011, 07:28 AM
cheers dude. shes still got a LONGGGGGGGGGGGGGG way to go tho

RedRkt01
08-01-2011, 02:51 PM
Rob, is TerryO helping you plan this perchance? You build is super similar to something he once did so I'm curious.

rev_head
08-02-2011, 02:01 AM
Rob, is TerryO helping you plan this perchance? You build is super similar to something he once did so I'm curious.

nope. no idea who that is. after doing a lil research doing this kind of setup using these throttles is quite common. alot of old school VW golfs and unfortunately civics have gone the way of this setup.
i have however gotten a lil advice from a guy from toymods

jaydog82
08-02-2011, 03:23 PM
nice looking project man.

RedRkt01
08-02-2011, 10:00 PM
nope. no idea who that is. after doing a lil research doing this kind of setup using these throttles is quite common. alot of old school VW golfs and unfortunately civics have gone the way of this setup.
i have however gotten a lil advice from a guy from toymods

Which guy on toymods? TerryO is on there. He has done some awesome 3SG builds down in your neck of the woods.