View Full Version : Compustar turbo timer programming

04-14-2011, 02:56 AM

Car has a compustar cm5000 remote/alarm installed now i want to enable the turbo timer. except now when I try and program with the remote (enabling the option first) I just get error on the two way. Any ideas as to what I'm doing wrong?

04-15-2011, 06:04 AM
I don't know what info you've found already, and I'm not familiar with the Compustar, but I did find this procedure for activating some of their systems on an RSX Forum:

"These instructions are for the 2W900FMR but it may work on other models.

press and hold buttons # 1 & 2 for 3 seconds. If you have a siren it will chirp once and your parking lights will flash once.

Then press button # 4 seven times (MAKING YOUR LIGHTS FLASH SEVENS TIMES) and wait for a second. Your parking lights will confirm 7 flashes.

After the 7th flash press button # 2. Your parking lights will confirm 2 flashes and your done. Now you can activate your turbo timer mode by pressing button # 3 & 4 together.


Also check out this thread: