PDA

View Full Version : Tool list for newbies



Seefernando
04-11-2011, 08:01 AM
Hey guys,

If you don't know already I'm pretty new to working on cars and actually COMPLETELY new to owning a car!

So I thought it would really benefit me and maybe some other members to create a list of tool one would need to do most jobs around a Celica.

I'm going to be swapping the engine out of my 92' GT-S, replacing the timing belt, changing the front bearings, replacing the air intake, and replacing most of the rear suspension.

I'll be using most of my dads tools, he used to do HVAC so he's got quite a few wrenches, ratchets and sockets. (but they are really un organized... and there are imperial and metric all mixed in there...) I've got a cordless impact driver, drill press, bench grinder, angle grinder and a few other misc. tools.

What are the major bolt sizes on the celica? (not sure if there are major sizes) What size bolt would I be mainly dealing while taking out the engine and drive shafts? I want to buy my own set of wrenches and sockets, and I'm thinking of buying a few quality wrenches, to be my go to wrenches.

Thanks!

Doowstados
04-11-2011, 08:34 AM
I suggest you invest in one of these:

Craftsman Mechanics Tool Set (http://www.google.com/products/catalog?q=craftsman+mechanics+tool+set&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&cid=623450697878485816&sa=X&ei=na2iTc-RGa7ciAL2w6nvAg&ved=0CDYQ8wIwAA)

That will cover pretty much everything you will need minus a few odds and ends like a good torque wrench, a socket for removing your CV nut (I don't remember what size, 27mm I think? That's what comes to mind.) and some other small stuff.

The best thing is craftsman tools are guaranteed for life. Don't listen to elitists who say you need to go with Matco or Snap-On. Those tools are great for professional mechanics but not necessary for hobbyists as Craftsman tools are guaranteed for life anyway. (Go into a store with a broken tool at any time and exchange it for a new one with no hassle.)

subspec
04-11-2011, 08:39 AM
standard sizes are typicaly. 8, 10, 12, 14, 16, 17, 24mm

cv hub nut is a 30mm nutt

all you need is a good set of wrenches. a breaker bar misc sockets listed above ratchets and a 24mm wrench is prob the biggest you need. its nice to have one if you ever drain your tranny

kungFUBAR
04-12-2011, 04:33 AM
Seriously...outside of the axle nuts and a few others, you can disassemble your entire car with 10mm, 12mm, 15mm and 17mm sockets.

4thgenceli
04-12-2011, 04:34 AM
Make sure you get extra 10 and 12mm.

There's never one around when you need it, and when you need a 10mm you'll find all your 12mm and vice versa.

WALKER
04-12-2011, 07:43 AM
As mentioned, start out with a standard metric wrench set and metric socket set. An 8mm, 10mm, and 12mm to start with will go along way on these cars.

Seefernando
04-12-2011, 04:36 PM
Awesome guys!

Thanks!

Quick questions, what do you thinking of this socket set?

http://www.canadiantire.ca/browse/product_detail.jsp?PRODUCT%3C%3Eprd_id=84552444328 7996&FOLDER%3C%3Efolder_id=1408474396672077&bmUID=1302622347526

I remember my teacher back in High School talking about the Mastercraft Maxium Line of tools and how they weren't really Master"crap" like the rest of mastercraft. This set is on sale till the end of the week. I've got both a pneumatic and battery powered impact driver.

Anyone use anything like this? Think its worth it?

Sifu
07-28-2011, 09:13 PM
EDIT... Didn't read the above post very well... :S

celica9303
07-28-2011, 10:59 PM
For a at home tools set. I always say craftsman. Hell I'm a mecanic by trade and most of my tools I use at work are craftsman except for my air tools and they are ingersol-rand. But my sockets and wrenches are craftsman.

Snap-on/matco are great tools but very expensive.

Galcobar
07-29-2011, 01:26 AM
19 mm will be required for suspension work -- all the big bolts in the rear I discovered.