PDA

View Full Version : Post up your engine bay pics !



UndaGrwnD
02-20-2011, 12:02 PM
so...i didnt see a thread about some enginebay pics...so post them up here !

ill start offcourse:

http://img442.imageshack.us/img442/9629/gt23sgte.jpg

Swapped JDM gen2 3sgte RC engine.

fdfx3
02-20-2011, 07:34 PM
This is not how my engine bay looks today, I have no replaced the stupid pod filter with the stock airfilterbox, I'm also going to remove the dump valve or replace it with a recirculating type and replace the 3 inch downpipe with a 2,5".
http://i1101.photobucket.com/albums/g427/fdfx3/Celica/100_0071.jpg

UndaGrwnD
02-20-2011, 08:24 PM
looks nice and clean.

why are you going back to 2.5 inch on the downpipe ?

fdfx3
02-20-2011, 11:31 PM
First of all my car has caught fire earlier because of to little clearance from things such as the alternatorcooling duct, The cooling duct caught fire after trying to race a BMW I first noticed a smell and when I stopped the car, flames came out of bonnet vent, luckily I was able too put out the fire with a bottle of water I had laying in the car my alternator also was destroyed because of the fire,luckily there was no damage too the car's paint or anything else, but I tel you my heart was beating like crazy after the fire was extinguished.

And second reason is that the rest of my exhaust system is 2,5 inch so when the exhaust flows trough the downpipe and suddenly have to squeze trough in to the 2,5 inch it hits an edge wich isn't good for the exhaust flow and probably will restrict the turbo from spooling properly.
So I think it wil help improving my power curve/ power band making it smoother.

I made the downpipe my self from some pipe's I had laying around an it looks something like this: http://i1101.photobucket.com/albums/g427/fdfx3/Celica/Bilde0285.jpg
It is not finished yet I have to weld in a flange for the lambda and sand down som welds.

UndaGrwnD
02-20-2011, 11:52 PM
hmm i, and alot of other people remove the airduct for the alternator when installing an aftermarket downpipe...thats because of the rubbing issue...thats maby a reason how you got your fire.

have you ever dyno'd your car?

klapa
02-20-2011, 11:55 PM
Yea - nice to start off with an engine bay that looks better than Pamela Anderson's tits! :) That is one beauty of a car!

genericly
02-21-2011, 12:04 AM
so...i didnt see a thread about some enginebay pics...so post them up here !

ill start offcourse:

http://img442.imageshack.us/img442/9629/gt23sgte.jpg

Swapped JDM gen2 3sgte RC engine.

If I were to have sex with an engine bay, yours would be my first pick. Very sexy.

joe's gt
02-21-2011, 04:44 AM
First of all my car has caught fire earlier because of to little clearance from things such as the alternatorcooling duct, The cooling duct caught fire after trying to race a BMW I first noticed a smell and when I stopped the car, flames came out of bonnet vent, luckily I was able too put out the fire with a bottle of water I had laying in the car my alternator also was destroyed because of the fire,luckily there was no damage too the car's paint or anything else, but I tel you my heart was beating like crazy after the fire was extinguished.

And second reason is that the rest of my exhaust system is 2,5 inch so when the exhaust flows trough the downpipe and suddenly have to squeze trough in to the 2,5 inch it hits an edge wich isn't good for the exhaust flow and probably will restrict the turbo from spooling properly.
So I think it wil help improving my power curve/ power band making it smoother.

I made the downpipe my self from some pipe's I had laying around an it looks something like this: http://i1101.photobucket.com/albums/g427/fdfx3/Celica/Bilde0285.jpg
It is not finished yet I have to weld in a flange for the lambda and sand down som welds.

Um yeah, your downpipe is badass. That thing looks very clean for a pieced together downpipe. Very impressed. How did you do the flange off the turbo?

fdfx3
02-21-2011, 05:35 AM
Hi thanks, I'm not the one who made the Flange's, I Bought the flanges I needed on ebay because I dont have the right tools for making those flange's, and grinding them out will take days.
I chose to make the downpipe myself when there was just one company that offerd 2,5 inch downpipe for st185, besides it is nothing wich is more satisfying or rewarding than making something yourself, as long as it turn's out good of course.
but anyways as i was saying there was only one company making 2,5" downpipe that was KO-Racing, if I bought from them the downpipe included shipping would have cost me about 614us dollar's wich I think is a littile too pricy for a 30cm bent pipe wich you can make yourself for lets say max 50-60 usd.
maybe I wil try to make an new one later in stainless steel.

Anyway if you want the link for the flange I used i got it right here:
Turbo flange: http://cgi.ebay.com/ebaymotors/Toyota-CT26-CT-26-TURBO-Exhaust-REAR-Flange-MR2-3SGTE-_W0QQcmdZViewItemQQhashZitem4aa74b1b00QQitemZ32063 4297088QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

the lower 3 bolt flange: http://cgi.ebay.com/MILD-STEEL-3-BOLT-2-5-EXHAUST-FLANGE-SKYLINE-SILVIA-/200352920693?pt=AU_Car_Parts_Accessories&hash=item2ea5f6f475

fdfx3
02-21-2011, 05:54 AM
hmm i, and alot of other people remove the airduct for the alternator when installing an aftermarket downpipe...thats because of the rubbing issue...thats maby a reason how you got your fire.

have you ever dyno'd your car?

Mhm belive I have noticed that people remove the duct, nut you see I bought the car with the 3 inch downpipe It wasent rubbing it was just very close, I had thought about it earlier but the old owner had driven around with the downpipe so I thought that it probably was able to withstand the heat something it didn't when I pushed the car hard.
the reason why I want too keep the duct is that I want my car too look stock, I dont want any blue hoses or flashy stuff under the bonnet, Besides the police here in Norway thinks you car gets faster an 100HP more if you drive around with blue hoses.

No I have never dyno'd it, but I used a G-tech (Performance meter), and acording to that I'm making about 240HP and 354NM/261ft-lbs at flywheel an 201WHP and 290NM/213ft-lbs at 1,1kg/15,95psi of boost. (This is not as acurat as a dyno but it should be close)

ChrisD
02-21-2011, 07:23 PM
OK, 10 years of ownership has seen the 165 engine change a bit. Hopefully changing in a good way. :P

2001 - can't find any pics ATM

2002
http://www.celicatech.com/gallery/files/4/engine.jpg

2003
http://gtfour.ca/DSC01902-1.JPG

2006
http://gtfour.ca/story/DSC00268.jpeg

2008
http://lh4.ggpht.com/_ZY7EMxDtOG0/Rttyuzk5k0I/AAAAAAAAAK0/XLvQWBeMvXg/s800/DSC00381.JPG

2009
http://lh5.ggpht.com/_ZY7EMxDtOG0/SoM3LHip7aI/AAAAAAAADE8/QkWqAjrlP-M/s800/IMG_0813.JPG

2010 (taking things apart)
http://www.celicatech.com/gallery/files/4/img_0411_819835.jpg

2011 (current - lots of things apart)
http://www.celicatech.com/gallery/files/4/img_1663.jpg

To be continued!

ChrisD
02-21-2011, 07:30 PM
Oh yeah, and the 205 ;)

http://lh4.ggpht.com/_ZY7EMxDtOG0/SdpAnfkQp7I/AAAAAAAACAE/5O7qmDSRqaM/s800/IMG_0166.jpg

UndaGrwnD
02-21-2011, 07:52 PM
@klapa , genericly

hehe thnx man !

@ChrisD, damn that engine bay has changed alot! but looks very nice from 2003 til 2008 ;)

fdfx3
02-21-2011, 10:05 PM
OK, 10 years of ownership has seen the 165 engine change a bit. Hopefully changing in a good way. :P

2001 - can't find any pics ATM

2002
http://www.celicatech.com/gallery/files/4/engine.jpg

2003
http://gtfour.ca/DSC01902-1.JPG

2006
http://gtfour.ca/story/DSC00268.jpeg

2008
http://lh4.ggpht.com/_ZY7EMxDtOG0/Rttyuzk5k0I/AAAAAAAAAK0/XLvQWBeMvXg/s800/DSC00381.JPG

2009
http://lh5.ggpht.com/_ZY7EMxDtOG0/SoM3LHip7aI/AAAAAAAADE8/QkWqAjrlP-M/s800/IMG_0813.JPG

2010 (taking things apart)
http://www.celicatech.com/gallery/files/4/img_0411_819835.jpg

2011 (current - lots of things apart)
http://www.celicatech.com/gallery/files/4/img_1663.jpg

To be continued!

Awsome looking enginebay!
That carbon plate/emblem on the intercooler is that something you have made yourself? never seen it before but it looks awesome.

How much horsepower and torque are you making? the st165.

UndaGrwnD
02-21-2011, 10:26 PM
yea how did you make the carbonplate?

ChrisD
02-21-2011, 10:27 PM
I purchased the IC cover from someone in the UK who made a batch way back when. I made the intake airbox myself though. ST165 power-wise, dyno'd at 234whp on a dyno dynamics, so take that with a grain of salt - in reality I should be making ~265whp on a dynojet. Looking for >300whp on a dynojet by the time everything is re-assembled (new cams, intake manifold, intercooler). :) Still very much limited by the ct20b turbo.

edit: to see how I did the airbox, I have some info in my project thread (link in signature)

klapa
02-22-2011, 01:54 AM
OK - time to READ IT AND WEEP!

Check my engine bay!

http://www.nashdom.com/CompPics/EngineBay2%28640%20x%20480%29.jpg

So I realize - I have a way to go ....

fdfx3
02-22-2011, 02:14 AM
OK - time to READ IT AND WEEP!

Check my engine bay!

http://www.nashdom.com/CompPics/EngineBay2%28640%20x%20480%29.jpg

So I realize - I have a way to go ....

Well at least you got one shiny pipe.

Dr Mojo
02-22-2011, 03:20 AM
Ah.... If only I had seen this thread yesterday.....before I cleaned the mouse nest out of the bottom of my air box!!

It's surprising how good the 5s will still run with sticks leaves cardboard and little black jellybeans floating around in there.

Mr. Babb
02-22-2011, 03:34 AM
A pic of my old celica
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc3/31659_422782796822_712941822_5383979_110527_n.jpg

fdfx3
02-22-2011, 03:37 AM
Ah.... If only I had seen this thread yesterday.....before I cleaned the mouse nest out of the bottom of my air box!!

It's surprising how good the 5s will still run with sticks leaves cardboard and little black jellybeans floating around in there.

Haha, I sugest you start changing your airfilter more frequently.

Car_Barn_Bandit
02-22-2011, 03:39 AM
OK - time to READ IT AND WEEP!

Check my engine bay!

http://www.nashdom.com/CompPics/EngineBay2%28640%20x%20480%29.jpg

So I realize - I have a way to go ....

Hey! you took candid pictures of my engine!

mannygtfour
02-22-2011, 04:27 AM
wow sweet engine bay guys. I wish my was as clean like everyones.

UndaGrwnD
02-22-2011, 05:40 PM
A pic of my old celica
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc3/31659_422782796822_712941822_5383979_110527_n.jpg

looks sick! what specs?

Smaay
02-22-2011, 11:31 PM
i will own you all with this
http://www.celicatech.com/gallery/files/6/1/6/DSC04129.JPG

Grot
02-22-2011, 11:39 PM
That a Supercharged 2zz?

Car_Barn_Bandit
02-22-2011, 11:43 PM
i will own you all with this
http://www.celicatech.com/gallery/files/6/1/6/DSC04129.JPG

This is why we need a desert meet out at El Mirage Lake.

CollapsedNut
02-23-2011, 12:09 AM
There is a TRD supercharger kit for the 2zz engines. Wish I had a 7th gen gt-s.

Mr. Babb
02-23-2011, 01:44 AM
looks sick! what specs?
2nd gen 3s, t3/t4 turbo, 3SGE intake manifold.

UndaGrwnD
02-23-2011, 06:32 PM
power?

90all-trac
02-24-2011, 01:49 AM
Not finished yet but you get the idea ;)

http://i228.photobucket.com/albums/ee195/alltracst185_2007/st185/005-2.jpg
http://i228.photobucket.com/albums/ee195/alltracst185_2007/st185/007-2.jpg
http://i228.photobucket.com/albums/ee195/alltracst185_2007/st185/006-2.jpg

Just mocking up the RMR mani
http://i228.photobucket.com/albums/ee195/alltracst185_2007/st185/008-1.jpg
http://i228.photobucket.com/albums/ee195/alltracst185_2007/st185/009-2.jpg
http://i228.photobucket.com/albums/ee195/alltracst185_2007/st185/010-1.jpg

fdfx3
02-24-2011, 04:11 AM
Nice what's that turbo you're running?

90all-trac
02-24-2011, 04:36 PM
Nice what's that turbo you're running?

It's a HKS GT3040 :)

Mr. Babb
02-24-2011, 11:31 PM
I like shiny parts

klapa
02-25-2011, 12:44 AM
I've got more than one! I have at least three or four.

jaydog82
02-25-2011, 02:54 AM
here is a pic of my engine as i got her, more to come after a new motor.
lots of leaves lol

BEFORE
http://i469.photobucket.com/albums/rr54/jaydog82celi/my%201988%20toyota%20AllTrac/DSC06776.jpg


AFTER
http://i469.photobucket.com/albums/rr54/jaydog82celi/IMAG0346.jpg

fdfx3
02-25-2011, 02:57 AM
here is a pic of my engine as i got her, more to come after a new motor.
lots of leaves lol
http://i469.photobucket.com/albums/rr54/jaydog82celi/my%201988%20toyota%20AllTrac/DSC06776.jpg

Ehey! a st165, I'm jealous!
Clean up the leaves please.

93cc
02-25-2011, 03:20 AM
http://img442.imageshack.us/img442/9629/gt23sgte.jpg

Very Nice!!!

93cc
02-25-2011, 03:23 AM
here's mine:

http://www.93alltrac.com/other/ToyotaFest/Bling.JPG

fdfx3
02-25-2011, 03:59 AM
here's mine:

http://www.93alltrac.com/other/ToyotaFest/Bling.JPG

What is that aluminum box to the left a cold air intake?, by the way this is probably one of the best looking fmic pipe routing I've seen so far.

jaydog82
02-25-2011, 04:45 PM
^ very nice. ya im going to clean the engine bay while i have the engine out to change it, lots of degreaser and elbow work.

93cc
02-27-2011, 12:58 AM
Thanks... That tank is for the water/methanol

UndaGrwnD
02-27-2011, 01:31 AM
Thnx 93cc

I like your Valve cover....Nice black! Want to do mine also..Same for the IC

93cc
02-28-2011, 02:18 AM
Thanks! but Dude you don't need to do anything to your engine bay!

bzdweezy
02-28-2011, 04:15 AM
A little dirty but this is mine

http://i1000.photobucket.com/albums/af123/5sfe91/2011-02-27153900.jpg

trumanpriest
02-28-2011, 04:28 PM
Will be redone once the weather warms up but still, Here is what I'm rocking currently.

http://i102.photobucket.com/albums/m98/trumanpriest/ST185/DSC01546-1.png?t=1298910390

Smaay
02-28-2011, 05:19 PM
There is a TRD supercharger kit for the 2zz engines. Wish I had a 7th gen gt-s.

the TRD kit was for the 1ZZ-FE ant came in carollas and matrix. Greddy came out with a non intercooled SC kit. this is my custom production M90 intercooled kit.

klapa
02-28-2011, 06:03 PM
Will be redone once the weather warms up but still, Here is what I'm rocking currently.

http://i102.photobucket.com/albums/m98/trumanpriest/ST185/DSC01546-1.png?t=1298910390

Wow - another beautiful car!

How do you get paint and body so nearly perfect on an Illinois car?

Mafix
02-28-2011, 07:33 PM
meh why not...
http://i13.photobucket.com/albums/a262/mafixcelica/A2/motor/sc4.jpg
http://i13.photobucket.com/albums/a262/mafixcelica/A2/motor/motora5.jpg
http://i13.photobucket.com/albums/a262/mafixcelica/A2/motor/newmotor1.jpg
http://i13.photobucket.com/albums/a262/mafixcelica/A2/motor/newmotor4.jpg
and more current
http://i13.photobucket.com/albums/a262/mafixcelica/A2/IMAG0134.jpg

UndaGrwnD
02-28-2011, 11:09 PM
Thanks! but Dude you don't need to do anything to your engine bay!

Hehe some nice little touches wont hurt;)

@trumanpriest

Very nice lookin paint

fdfx3
03-01-2011, 12:29 AM
meh why not...
http://i13.photobucket.com/albums/a262/mafixcelica/A2/motor/sc4.jpg
http://i13.photobucket.com/albums/a262/mafixcelica/A2/motor/motora5.jpg
http://i13.photobucket.com/albums/a262/mafixcelica/A2/motor/newmotor1.jpg
http://i13.photobucket.com/albums/a262/mafixcelica/A2/motor/newmotor4.jpg
and more current
http://i13.photobucket.com/albums/a262/mafixcelica/A2/IMAG0134.jpg

Nice engine bay, what kind of exhaust manifold are you running?
Seems like a serious engine build, how much HP and torque are your engine making?

BabyBear
03-01-2011, 12:52 AM
psh, I got you all beat, I got me some pancake engine in mine!

http://www.celicatech.com/gallery/files/7/8/8/8/photo_30702.jpg

And it looks as though my intercooler has been trying to eat some bugs...

Luni
03-01-2011, 01:03 AM
Bugs? Dont eat em!

fdfx3
03-01-2011, 01:15 AM
psh, I got you all beat, I got me some pancake engine in mine!

http://www.celicatech.com/gallery/files/7/8/8/8/photo_30702.jpg

And it looks as though my intercooler has been trying to eat some bugs...

Uhh? posting this here? Wouldn't that be the same as swearing in church?

Car_Barn_Bandit
03-01-2011, 02:15 AM
Uhh? posting this here? Wouldn't that be the same as farting in church?

Fixed.

klapa
03-01-2011, 02:48 AM
Uhh? posting this here? Wouldn't that be the same as swearing in church?

I didn't quite "get" that one.

celicatuner92
03-01-2011, 03:01 AM
might as well
http://i172.photobucket.com/albums/w39/celicatuner92/102_0827.jpg
http://i172.photobucket.com/albums/w39/celicatuner92/102_0825.jpg

trumanpriest
03-01-2011, 03:26 AM
Wow - another beautiful car!

How do you get paint and body so nearly perfect on an Illinois car?

Paint is only a few years old (6ish) - Expensive paint job back to Factory Toyota Super Red done right. 'll have to post some pictures up this summer after I use the spray detailer on it. Such a deep shine. It also helps she is garaged and generally only gets driven once a week or for special occasions.

Luni
03-01-2011, 03:53 AM
I didn't quite "get" that one.

Hes saying its sacrilege to post a Scooby on a Celica forum.

And its not. I like that car. Its fast and it drives nice.

fdfx3
03-01-2011, 04:16 AM
I didn't quite "get" that one.

okay I realize now that it probably dosent have the same meaning in us, but over here that is a saying, like if you do something inappropriate like posting a wrx engine bay on a Celica forum. get it?

fdfx3
03-01-2011, 04:18 AM
Hes saying its sacrilege to post a Scooby on a Celica forum.

And its not. I like that car. Its fast and it drives nice.

This guy gets it (kudos to Luni!)
Not that I know what sacrilege means.

Personally I dont got anything against wrx, it was only meant as a sarcastic joke.

BabyBear
03-01-2011, 04:24 AM
okay I realize now that it probably dosent have the same meaning in us, but over here that is a saying, like if you do something inappropriate like posting a wrx engine bay on a Celica forum. get it?

Its an STI foo!

fdfx3
03-01-2011, 04:37 AM
Its an STI foo!

Sorry hope I didn't offend you. I'm a noob when it comes to Hyundai's and Subaru's.:)

Are STI above WRX?

http://www.youtube.com/watch?v=qtq4qDgkuGc

BabyBear
03-01-2011, 04:50 PM
Sorry hope I didn't offend you. I'm a noob when it comes to Hyundai's and Subaru's.:)

Are STI above WRX?

http://www.youtube.com/watch?v=qtq4qDgkuGc

Yes, you have to have a MUCH higher level of douchebaggery to own an STI. True story.

Mafix
03-01-2011, 06:36 PM
currently making not enough. we are still changing things around on her. hopefully everything goes well this week and i'll be done tuning. built for 650hp. though i will need to change the fuel around to get up there.
the exhaust manifold is temporary. a good tide me over while i'm having one made.

fdfx3
03-01-2011, 08:15 PM
Haha I'm a douchebag, well I could never afford one anyhow those things cost something like 110 000USD over here.
At wilkins hyndai and subaru, we have hyundais and surbarus!

BabyBear
03-01-2011, 08:21 PM
Why are they so expensive? Totally not worth $110,000

WALKER
03-01-2011, 08:27 PM
100% Stock ST205...for now!

https://lh5.googleusercontent.com/_dVQEH6BdvXI/Sb13Xf0SMDI/AAAAAAAABDE/BadMTTWtoJo/13786_1228921571.jpg

fdfx3
03-01-2011, 08:38 PM
Why are they so expensive? Totally not worth $110,000

Well why I dont know but it is because of all the Norwegian taxes, this country except from me HATE cars.
I had to pay 27,200USD for my Celica, that is considered asd one of the cheaper cars in the turbo 4wd class here.
A mitsubishi evo from the year 2000 is about 77,100USD.

Mafix
03-01-2011, 08:39 PM
holy jesus!

UndaGrwnD
03-01-2011, 08:39 PM
Whatsup with the radiator?

UndaGrwnD
04-03-2011, 12:41 PM
time for some update here:

http://img12.imageshack.us/img12/3531/3sgterc.jpg

BonzaiCelica
04-04-2011, 06:43 AM
Oh ya 3SGE Beams Redtop!! :D
http://i483.photobucket.com/albums/rr197/BonzaiCelica/1999%20Celica%20GT/DSCN3721.jpg

UndaGrwnD
04-04-2011, 03:59 PM
looking very clean! nice battery ;)

RedRkt01
04-11-2011, 04:55 AM
Paint is only a few years old (6ish) - Expensive paint job back to Factory Toyota Super Red done right. 'll have to post some pictures up this summer after I use the spray detailer on it. Such a deep shine. It also helps she is garaged and generally only gets driven once a week or for special occasions.

Where in STL dud you get it done? I'm about ready for some new 3E5 myslef.

UndaGrwnD
04-20-2011, 11:28 AM
http://img146.imageshack.us/img146/2733/imag05071.jpg
http://img146.imageshack.us/img146/2733/imag05071.jpg

fresh one, now with a black T piece...looks much nicer like this...want a black/chrome theme under the hood...

black_celicagti16
04-21-2011, 08:47 PM
http://farm8.staticflickr.com/7028/6782339363_9820690272_z.jpg (http://www.flickr.com/photos/69834109@N02/6782339363/)
DSCF3644 (http://www.flickr.com/photos/69834109@N02/6782339363/) por celica_gt-i (http://www.flickr.com/people/69834109@N02/), no Flickr

jaydog82
02-22-2012, 11:24 PM
Here is my engine as it sits now after the re-build.
http://i469.photobucket.com/albums/rr54/jaydog82celi/IMAG0346.jpg

vip09
02-23-2012, 04:47 AM
You forgot to add Reynold's Wrap to your mod list.

jaydog82
02-23-2012, 05:44 AM
Darn, I knew I forgot something lol. It does not look pretty, but it should keep temps down.

Sent from my HTC Sensation XE with Beats Audio using Tapatalk

schnee
03-10-2012, 04:37 AM
Whole idea was to keep it as stock looking as possible - see how many changes you can spot?

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Toyota%20Celica/162%20TEMS/Engine%20rebuild/2011-12-17_20-31-41_937.jpg

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Toyota%20Celica/162%20TEMS/Engine%20rebuild/2011-12-17_20-32-34_506.jpg

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Toyota%20Celica/162%20TEMS/Engine%20rebuild/10122011107.jpg

This is how they mod TA22's over here - Taken at a recent Oldeskoole meet, pass the kleenex & enjoy

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/IMG_3040.jpg

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/P1220031.jpg

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/IMG_3044.jpg

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/P1220032.jpg

How's this for JDM
http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/P1220040.jpg

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/IMG_3041.jpg

ST205's
http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/P7010009.jpg

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/P7010011.jpg

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/P7010007.jpg

http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/394244_3105442758887_1348817759_4009509_561705284_ n.jpg

ST165
http://i493.photobucket.com/albums/rr292/_MrMagoo/Cars/Oldskool%20meet/2012-01-15_12-16-33_356.jpg