View Full Version : camber kits for 02 celica gts

02-20-2011, 12:06 AM
I'm doing some online shopping for lowering springs and camber kits, the springs I have taken care of, but now I'm having a little bit more trouble finding camber kits for the rear of my car. The front is no problem, almost everyone makes em, but what about the rear? does anyone know of a brand that makes both front and rear? or do I even need them for the rear? planning on making a 1.5"-2" drop all around.

02-20-2011, 02:04 AM
You should have camber adjustment in the upper rear sometimes the exhaust gets in the way

02-20-2011, 03:59 AM
that explains why i couldn't find anything for the rear. cool, makes everything a lot easier!

02-21-2011, 06:07 AM
Keep in mind rears are double wishbone which dynamically adjusts camber better than macpherson strut (which doesnt).

I do believe whiteline makes adjustable camber plates for the rears. I know you just use lobed bolts in the front. To be honest, you may not need anything for the rear. Im not expert on a 7th gen suspension though. This is a job for Bugs.

02-21-2011, 04:03 PM
nah nah nah, SPC and Hotchkis make rear camber arms for the 00-05 celica. They are pricey new $265-350 and you only need them if your going lower than 2". If you getting tein stech or hotchkis springs i wouldnt bother with them. You will be at the edge of spec without them. Any lower and you will have more negative camber but if your toe is set to around .5-0 then you wont wear tires too badly.

02-23-2011, 06:19 AM
Eibach Pro-Alignment 2000-2005 Toyota Celica (Rear Camber) Part# 5.67440K usually priced around $180

02-23-2011, 08:39 PM
Those look just like the spc ones and are cheaper.

03-07-2011, 07:11 PM
I ended buying the HTeins. Gives it about a 1.2" drop all around. Should be arriving on the 9th and installing them the following day. I'll check to see if I can notice the butterfly effect, but i'll eventually grab a set of SPC rear cambers for the rear later on. Thanks for all the help.