PDA

View Full Version : Wheres dis go?



CollapsedNut
02-15-2011, 05:26 PM
http://www.celicatech.com/gallery/files/4/6/9/4/0212112237.jpg (http://www.celicatech.com/gallery/showimage.php?i=18612)

It on the engine harness, driver side. Any ideas? My 3SFE harness doesnt have this

alltracman78
02-15-2011, 06:07 PM
To ground.
It's a noise filter. Stick that spade connector under a 10mm bolt by the drivers strut tower.
Or somewhere else.

CollapsedNut
02-16-2011, 02:56 PM
Thank you good sir.

CollapsedNut
02-17-2011, 01:51 AM
Got another question, I tihnk Im missing parts. On the firewall where the ignitor is, whats the other two little boxes? I dont have those :(
Mafix I stole your picture
http://i13.photobucket.com/albums/a262/mafixcelica/A2/oldmotor5.jpg

FluffyNutts
02-17-2011, 02:28 AM
I think the one in the middle is like the resistor or something like that.

CollapsedNut
02-17-2011, 02:32 AM
Excellent, that clears it right up -_-
Just kiddin. Resistor for what?

Hookecho
02-17-2011, 02:39 AM
It's a resistor pack to the fuel injectors.

Hookecho
02-17-2011, 02:39 AM
and I'm thinking that was for the 3sgte.

4thgenceli
02-17-2011, 02:44 AM
Heres an 89 gts engine bay.

http://ourlewisfamily.net/content/g1/Jasmine/normal_cleaned_bay.JPG

More pics in my project thread if u wanna compare

CollapsedNut
02-17-2011, 02:56 AM
thanks guys. looks like i dont need the other two things.

ChrisD
02-17-2011, 05:07 PM
Fuel pump or fuel injector resistor pack, and the fuel pump relay.