PDA

View Full Version : New 5S-FE turbo kits



Smaay
01-02-2011, 05:05 AM
I'm still finishing up on the manifold. here are some progress pics. The piping will be the same as Eryns kit for the 7A-FE. Well it will be 50/50. from the turbo to the intercooler it will be the same at the 7A-FE kit, but from the intercooler to the throttle body it will be like my kit. That is because the starter is on the back on the 7A-FE. The turbo is going to be a T3 super 60 capable of 300HP. I'm doing the initial install on my car and the tuning. Ill be using the RX7 injectors that we are all familiar with. Ill be providing the Split Second box as an oiption. OK how much you ask? cost is going to be $2000.00 for the tuner kit, which includes turbo, piping, couplers, clamps, oil lines, oil return. The complete kit is 2500.00 which includes a tuned Split Second box and injectors. PM me if you have any questions.

http://www.celicatech.com/gallery/files/6/1/6/manifold1.jpg

http://www.celicatech.com/gallery/files/6/1/6/manifold2.jpg

http://www.celicatech.com/gallery/files/6/1/6/manifold3.jpg

http://www.celicatech.com/gallery/files/6/1/6/manifold4.jpg

http://www.celicatech.com/gallery/files/6/1/6/manifold5.jpg

http://www.celicatech.com/gallery/files/6/1/6/manifold6.jpg

as you can see its really easy to reach under the manifold to change the oil filter

rizin
01-02-2011, 05:23 AM
I like that you made it with the compressor on the passenger side. Looks good.

Grot
01-02-2011, 06:19 AM
Now this will still require a standalone or piggyback to control fuel won't it?

And I'm assuming that with minor tweaking this kit would work for us 4g guys with a 3sge?

Mafix
01-02-2011, 10:23 PM
the design looks pretty good but
either that manifold will crack the tubes near the collector or it will shear the studs in the head. there is NO thermal expansion room.

celica9303
01-03-2011, 01:05 PM
I have to agree with mafix on this one smaay. Looks awesome though. What's a split second box?

Car_Barn_Bandit
01-03-2011, 02:27 PM
He did mention he was finishing the manifold...

Smaay
01-05-2011, 05:45 AM
here are some better quality pics. ill have (2) 5S-FE kits and 1 7A-FE kit. if i get any local buyers, ill install it for free and pay for the dyno tune.

http://www.celicatech.com/gallery/files/6/1/6/dsc05000.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05002.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05003.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05004.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05005.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05006.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05007.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05008.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05009.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05010.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05011.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05012.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05013.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05014.jpg

http://www.celicatech.com/gallery/files/6/1/6/dsc05015.jpg