PDA

View Full Version : Seat rail options (recaro,bride,etc.)



cbrkp
09-20-2010, 01:54 AM
Hey all,

looking to put some recaros or brides in ....any idea where I can get a set of seat rails for recaro's? brides have a seat rail but I can't find one for recaro.

ericfragola
09-25-2010, 08:57 PM
Do what I did and modify the stock seat rail. I measured the bottom of the new bucket seats. Then I cutt off the the bottom of my old seats and salvaged the sliders. I bolted them in and laid down and welded 2 metal cross bars. I then lined it up with my seats and drilled out some holes to bolt the seats into the cross bars. Sounds pretty easy but it takes a lot of patience with lining things up.

---------- Post added at 12:57 PM ---------- Previous post was at 12:54 PM ----------

Ps: even when I got my 165 that was used as just a straight racecar. The sparco seat put in it was cutom mounted onto some metal cross bars that were bolted into the stock rails. I prefer welding the cross bars because bolts limit the sliding ability.

KoreanJoey
09-26-2010, 02:02 AM
http://www.wedgeengineering.net/