PDA

View Full Version : surewin header product review with photo



aye87
09-14-2010, 09:59 PM
internal has been grinded to remove slag produced by welder
http://img193.imageshack.us/img193/5025/dscf1176c.jpg
http://img844.imageshack.us/img844/2047/dscf1177.jpg
http://img713.imageshack.us/img713/7701/dscf1178r.jpg
http://img833.imageshack.us/img833/7711/dscf1179v.jpg
http://img84.imageshack.us/img84/6886/dscf1183db.jpg
http://img841.imageshack.us/img841/3198/dscf1184j.jpg
http://img838.imageshack.us/img838/484/dscf1185m.jpg
http://img21.imageshack.us/img21/333/dscf1186t.jpg
http://img641.imageshack.us/img641/2484/dscf1187x.jpg
http://img823.imageshack.us/img823/3257/dscf1188.jpg
http://img28.imageshack.us/img28/9884/dscf1189y.jpg
http://img201.imageshack.us/img201/7203/dscf1190.jpg
http://img441.imageshack.us/img441/3726/dscf1191z.jpg

aye87
09-19-2010, 10:58 PM
update: i put on the header today, it has very noticable improvement everything does aligned up as they should, it need to take out the adjustment bolt of the alternator to reach nut held in place of the header at far corner(do not need to take out whole assembly, just lift it up) also the two bolts for oxygen sensor are welded sideway, it is because for the o2 sensor to fit in but they dont, i dont wanna strip the bolt by tighting it sideway so i drill and make the two holes bigger from o2 sensor, the wire length is normal incase anyone wonder about them
also i managed to snapped one of the bolt for the heatshield, piror to that i soaked all the bolt with pentrating lubricant
stock header and catalyic converter is kind of heavy, if you are skinny get some one to help
hope it help anyone who might come across this

Sdjcool
09-19-2010, 11:10 PM
have you come across any check engine lights yet?

aye87
09-20-2010, 12:43 AM
no, it is not CA model, only one o2 sensor but i will need to put the stock one back for year inspection

Smaay
09-20-2010, 06:39 PM
http://www.celicatech.com/forums/showthread.php?t=42724

ravensguildassasin
09-20-2010, 07:47 PM
where did you get it: I.E. what was the seller information, do you have a link.

aye87
09-20-2010, 10:07 PM
they have them on ebay
it will say 94-99 celica 5sgte header but will fit 90-93
it smell very bad without cat though, bad for health

Okctrd
09-22-2010, 02:05 AM
seller i got mine from was surewinproducts


hers the link.. looks like he came down in his prices they used to be like $110 with shipping..

http://cgi.ebay.com/ebaymotors/Toyota-Celica-2-2-GT-94-99-Exhaust-Header-5SGTE-_W0QQcmdZViewItemQQhashZitem4cf1cb3b63QQitemZ33047 4142563QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries#ht_4157wt_847







..