PDA

View Full Version : I Need IG1 and IG2 Pinouts for a 92 GT4 and a 90 Alltrac



red_celly_HKS
07-20-2010, 08:30 PM
I'm dooing an engine swap on my 90 Celica Alltrac and am putting in a 3S GTE from a 92 GT4 but i need to re-pin the 2 white and grey connectors under the dash. but i'm having trouble finding diagrams! all i get is ecu diagrams if you can send me a link or something that would be great! Thanks teh 2 diagrams i need, need to be colored and labeled. Thanks!

BlueDragon
07-25-2010, 04:26 PM
I too would love the info on these connectors. I have a few issues since my swap and re-pin. I have a 91 alltrac with 92-93 JDM swap also. Apparently you only get all the BGB and diagrams if your a contributing member =(

ChrisD
07-26-2010, 04:42 PM
Unfortunately there is not really a pinout diagram for those plugs. The EWD Books just show by circuit and reference the plugs when they go through it.

This page might help: http://gtfour.ca/howtoswap.html (scroll down)

Most likely it will be very similar, just have to flip a few wires around here and there.

ChrisD
07-26-2010, 04:42 PM
Unfortunately there is not really a pinout diagram for those plugs. The EWD Books just show by circuit and reference the plugs when they go through it.

This page might help: http://gtfour.ca/howtoswap.html (scroll down)

Most likely it will be very similar, just have to flip a few wires around here and there.