PDA

View Full Version : radiator question



85gtsblackman
06-06-2010, 08:56 PM
ok so the 22rte comes stock with a 3 row radiator, but i cant use it. Darkness has a metal 1 row thats still good. Would i be able to get the endtanks welded onto a 2 or 3 row core and call it a day?

no i cant use a celica supra radiator, at least from what ive red, i still may try so see if it fits and lines up, if it does ill go this route, if it dont im back to the 1st plan.

85gtsblackman
06-08-2010, 06:30 AM
extreamly helpful site/people with no answers...........yay :yupnope:

pinoyGT4
06-09-2010, 04:45 PM
ok so regarding the welding..

its kinda more of soldering the caps on the core..

copper top rads here sometimes are customized to fit some cores.. depending on which car it'll be installed.. i dunno there if you guys have radiator shops that does these stuff..

so...
if your top fits your body/core, then maybe it can be done.. :)
anyway it'll be tested for leaks afterwards so no worries.. :D


unless your rad is full alloy, its soldered not welded.. :biggthumpup: