PDA

View Full Version : Sifu's Project "Money Pit" *should be changed to will~never~finish~thread*



Sifu
05-27-2010, 06:39 AM
Here's my 1990 Celica Alltrac. It's probably been down since 2002, maybe earlier who knows (I've lost track of time). This baby has been garaged kept since then and never really worked on (I've been amassing the largest Alltrac parts bin though). I sorta' dislike working on her because she requires money all the damned time. At this point it's just finishing her just to finish the project. So I broke the number one rule and purchased another project car (er... 2 actually but we'll leave those out).

Here are the mods...
Mods:
- Chris K. long block stout for 550hp+
* Block: Deck, line bore, smooth hone and gulley mods
* Crank: Chamfer, polish and Balanced
* Clevitte-77 bearings
* Stock bore Ross Pistons
* Eagle rods
* ARP head stud kit
* High flow Ported and shimmed oil pump
* New Primary Idler Pulley
* New Secondary Idler Pulley
* New Tensioner
* New Timing Belt
* TTE Head Gasket
* 34.5 mm Ferrea Intake valves
* 30 mm Ferrea Exhaust valves
* 65 lb Valve Springs with Titanium Retainers
* Shim-less buckets
* HKS 272 intake cam
* HKS 264 Exhaust cam
* Adjustable cam gear
* Street port
- KO GT35R Street Brawler Kit
*Full 3" downpipe with V band clamp and integrated 1.75 wastegate dump tube (with its own flex section)
*Wideband O2 Port and Plug
*Tial Sport 38mm external wastegate
*Garrett GT series turbo GT3582R
- Extreme Boost or Chris K. top feed fuel rail (bling or Chris? I dunno?)
- 880 SARD top feed injectors
- SARD FPR
- Walbro 255 fuel pump
- Chris K. Intake Sidefeed Intake Manifold
- BBK 70mm throttle body
- Bilstein Custom Coilovers
- Cusco pillow mounts
- Cusco camber plates
- RC Transmission
- Speed Source Braided Clutch Line
- Speed Source clutch slave piston extender
- Techna fit SS brake lines
- Cusco underbody brace
- Cusco Rear Strut Tower Bar
- Apexi AVC-R Boost Controller
- ST205 Torsen LSD
- HKS SSQ BOV
- HKS Twin Disc Clutch
- HKS Green shroom filter (which I've been told isn't good for our vehicles)
- CS bumper for FMIC
- Whiteline bushings for zero whiteline parts
- Camber adjustment tools
- Front clear corner lights
- 1 radical blue neon painted Stock Steering wheel (i didn't do this btw).
- Rice in tail pipe. TWICE!!!

Things to get (in order of importance)!!!
- Standalone EMS (still looking at options, torn between AEM, Motec, Hydra)
- Full exhaust system
- Volk Rims
- High Grip Tires
- Optima Battery
- Gauges or a STACK unit
- Momo Steering wheel (or TOMS) to get rid of that horrid neon wheel
- Momo bucket seats
- Cusco Roll cage
- Underbody paint and full paint job
- Rice stickers w/ the whistle tip. Cause we all know what that does. woo WOO!!!

Goal: 550hp+
Status: Sitting on the jack stands and STILL awaiting the Powerball Jackpot.

She's almost done. SERIOUSLY guys she almost is. I just want to get it right and since money is very tight with this awesome economy I'd rather get her done without going into debt than splurging on her and then ending up selling her.

Patience my precious... Patience... :nopity:

TIME FOR PICS!
Here are some photos...
http://www.yohdawg.com/blog_pics/alltrac/at1.jpg
http://www.yohdawg.com/blog_pics/alltrac/at2.jpg
http://www.yohdawg.com/blog_pics/alltrac/at3.jpg
http://www.yohdawg.com/blog_pics/alltrac/3.jpg
http://www.yohdawg.com/blog_pics/alltrac/build/current.jpg
http://www.yohdawg.com/blog_pics/alltrac/parts/gt35r_2.jpg
http://www.yohdawg.com/blog_pics/alltrac/parts/turbos2.jpg
http://www.yohdawg.com/blog_pics/alltrac/parts/turbos3.jpg
I'll post up newer photos later. Sadly I still have parts boxed up but I assure you all it'll definately be worth the wait...

Maruki-kun
05-27-2010, 06:47 AM
turbo kit looks familiar:

http://i20.photobucket.com/albums/b213/Ku-sama/MR2%20Stuff/Dustins%20MR2/DSCF6514.jpg

http://i20.photobucket.com/albums/b213/Ku-sama/MR2%20Stuff/Dustins%20MR2/DSCF6515.jpg





:)

46 trim garret though

Sifu
05-27-2010, 12:56 PM
My original one was sent to KO Racing where they re-shimmed the turbine. It's a T3/T4 hybrid dual BB .63 trim. My goals were around 500hp but this turbo probably would be stretching it so I purchased Trevor's gt35r kit (the larger one of course). It'll be no problem now; just a matter of money...

chewabacha
06-09-2010, 06:52 PM
So... any update yet Yoh!? When do I finally get to see this thing!? I've been putting waaay too many miles on my trac lately. If I had your setup in mine, I could only imagine the additional miles I'd already have.

If you're not going to finish, sell me the ChrisK motor and 35R for the price you picked it up lolz!

bloodMoney
06-09-2010, 07:10 PM
Well that was short.... :P

<--- Jealous. But you knew that already. I can't wait to see the video of the first startup on this beast. Keep hoarding parts... :)

rev_head
06-10-2010, 03:16 AM
awesome build should be well wurth it!