PDA

View Full Version : a 5sgte rear wheel drive in corollaA? so cal no way>>>



3sgelevin
05-23-2010, 08:59 PM
after pulling the head out of my 3sge
i just decided to do a full race 5sgte engine i got all the parts anyway
i decided to do a brake line and hoses tuck on my engine
stitchweld and repaint it due to many scratches occured in the past 6 years that i owned it
http://img.photobucket.com/albums/v405/bzebern/DSCF5429.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5427.jpg
removed brake and master cylinder
http://img.photobucket.com/albums/v405/bzebern/DSCF5428.jpg
too many scratches in the engine bay
http://img.photobucket.com/albums/v405/bzebern/DSCF5433.jpg
some parts will be ceramic coated
http://img.photobucket.com/albums/v405/bzebern/DSCF5435.jpg
like this 3s headers rust had occured (nice huh)
too bad i wont be using it anymore =( its gonna be for sale later on as a kit
http://img.photobucket.com/albums/v405/bzebern/DSCF5443.jpg
car is bare
http://img.photobucket.com/albums/v405/bzebern/DSCF5437.jpg



Modified by bnicolas at 9:35 PM 3/31/2010

started to cover big holes and weld it later
http://img.photobucket.com/albums/v405/bzebern/DSCF5439.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5440.jpg
started porting my custom intake manifold to accept the ae111 throttle bodies
gotta have patience not easy to port no wonder it takes the shop 2 weeks to do it
http://img.photobucket.com/albums/v405/bzebern/DSCF5441.jpg


Modified by bnicolas at 9:35 PM 3/31/2010

what the car used to look like
i just need 3 mos to finish it
http://img.photobucket.com/albums/v405/bzebern/DSCF5377.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5376.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5375.jpg
http://img.photobucket.com/albums/v405/bzebern/corolla%20build%20up/772840645_bfc8848c29.jpg


Modified by bnicolas at 9:36 PM 3/31/2010

engine on stand 2nd gen 3sge hicomp
on the left 3sturbo
right 5s from a camry
http://img.photobucket.com/albums/v405/bzebern/DSCF5448.jpg
stripping the engine bay
http://img.photobucket.com/albums/v405/bzebern/DSCF5458.jpg
w55 transmission taken down with custom bellhousing and driveshaft
http://img.photobucket.com/albums/v405/bzebern/DSCF5446.jpg
on the way to the machine shop
to get oil squirters transferred and water holes done
http://img.photobucket.com/albums/v405/bzebern/DSCF5449.jpg
check out the je pistons oversize
http://img.photobucket.com/albums/v405/bzebern/corolla%20parts/DSCF4836.jpg


Modified by bnicolas at 6:12 AM 3/11/2010


Modified by bnicolas at 9:36 PM 3/31/2010

just finished covering up the holes
http://img.photobucket.com/albums/v405/bzebern/DSCF5460.jpg
getting ready for painting primer
http://img.photobucket.com/albums/v405/bzebern/DSCF5461.jpg
primered done
http://img.photobucket.com/albums/v405/bzebern/DSCF5464.jpg


Modified by bnicolas at 9:38 PM 3/31/2010

found some uneven spots sanded it again
http://img.photobucket.com/albums/v405/bzebern/DSCF5467.jpg
mixing primer for the last time
http://img.photobucket.com/albums/v405/bzebern/DSCF5468.jpg
final touch ready for paint
http://img.photobucket.com/albums/v405/bzebern/DSCF5465.jpg
i cant finish painting because of the stupid wind


Modified by bnicolas at 9:39 PM 3/31/2010

so after 2 shots of clear coat
http://img.photobucket.com/albums/v405/bzebern/DSCF5471.jpg
here you go a clean engine bay money shot
http://img.photobucket.com/albums/v405/bzebern/DSCF5472.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5476.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5477.jpg
will buff it next week


Modified by bnicolas at 9:39 PM 3/31/2010

got something done today little by little
wire tuck
http://img.photobucket.com/albums/v405/bzebern/DSCF5485.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5482.jpg
installed front end parts
http://img.photobucket.com/albums/v405/bzebern/DSCF5487.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5484.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5483.jpg


Modified by bnicolas at 9:40 PM 3/31/2010

From You!!! lol

i would like to pick that beatrush panel but i dont know if my oil pan
is gonna be a problem....

while waiting for some parts
i decided to reweld the rear fender its too noisy inside
http://img.photobucket.com/albums/v405/bzebern/DSCF5489.jpg
grind some extra welds
http://img.photobucket.com/albums/v405/bzebern/DSCF5491.jpg
and freaking body work again shoot im really getting tired of the shetz
http://img.photobucket.com/albums/v405/bzebern/DSCF5490.jpg


Modified by bnicolas at 9:40 PM 3/31/2010

so can you say lightened crankshaft!
just got back from the machine shop and boy they really trimmed this sucker up real good...
http://img.photobucket.com/albums/v405/bzebern/DSCF5492.jpg
hopefully this is good for 10k rpm
can you see the difference
lightened balance knife edeged what more could you ask for
http://img.photobucket.com/albums/v405/bzebern/DSCF5494.jpg


Modified by bnicolas at 9:41 PM 3/31/2010

got my flywheel resurfaced
http://img.photobucket.com/albums/v405/bzebern/DSCF5499.jpg

past few days went to the junkyard and picked up rx7 fc calipers and borrowed my friends (2tgeu's) brackets so i can fabricate my own
francis its all your fault this wasnt in my current plan ha ha naubos tuloy oras ko sa paggawa
thanks by the way
http://img.photobucket.com/albums/v405/bzebern/DSCF5500.jpg

anong cad design
cayod design the filipino way lol!!!!
in english grind
in ilokano awan kwarta>>>>>
http://img.photobucket.com/albums/v405/bzebern/DSCF5503.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5501.jpg

painted brake booster and installed master cylinder crossmember and throttle cable
http://img.photobucket.com/albums/v405/bzebern/DSCF5506.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5508.jpg

installed my new celica supra brake calipers
http://img.photobucket.com/albums/v405/bzebern/DSCF5504.jpg

my pistons came in today oversize 87.5 for a 5s
and no the 87mm oversize mr2 turbo pistons is not going to work due to the pins are high its gonna stick out
http://img.photobucket.com/albums/v405/bzebern/032510155332.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5514.jpg
i bought an intercooler spearco 3 1/2 inch thick
very nice
http://img.photobucket.com/albums/v405/bzebern/032610065910.jpg
had a problem with the center radiator support i have to trim it down
http://img.photobucket.com/albums/v405/bzebern/032610072112.jpg
with custom brackets made fits perfect
http://img.photobucket.com/albums/v405/bzebern/032610090738.jpg

tomorrow will be upgrading the fuel system
for my 1000 cc injectors

i know im not even half way done

so i drop my fuel tank to add an existing line
and to check if its clean
i realize that i have another steel line hanging in my engine bay for the the vacuum so i used that instead so i dont have to add another hose again
http://img.photobucket.com/albums/v405/bzebern/DSCF5509.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5510.jpg
here is the hose that i added
http://img.photobucket.com/albums/v405/bzebern/DSCF5511.jpg
so im done putting it back
http://img.photobucket.com/albums/v405/bzebern/DSCF5513.jpg

tomorrow i will be adding another fuel pump so it could feed my 1000cc rc injectors


Thank you for the complements

Today i drilled holes for my nagisa shock tower plates
http://img.photobucket.com/albums/v405/bzebern/DSCF5519.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5517.jpg
i added another fuel pump
http://img.photobucket.com/albums/v405/bzebern/DSCF5526.jpg
soldered the wires
http://img.photobucket.com/albums/v405/bzebern/DSCF5527.jpg
here is the finishing touch
http://img.photobucket.com/albums/v405/bzebern/DSCF5528.jpg
here you go installed under the car
http://img.photobucket.com/albums/v405/bzebern/DSCF5530.jpg
my friend came over i helped him changed brake pads and belts
http://img.photobucket.com/albums/v405/bzebern/DSCF5531.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5533.jpg


today i swapped my steering wheel from the beast. its been 2 years that i've been slacking ha ha ha
too small from chasis
http://img.photobucket.com/albums/v405/bzebern/DSCF5534.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5535.jpg
and here's the 86
http://img.photobucket.com/albums/v405/bzebern/DSCF5536.jpg
i painted the screws cause its all rusted
http://img.photobucket.com/albums/v405/bzebern/DSCF5538.jpg
im done on the front suspension for now
i need to finish the car by next month
http://img.photobucket.com/albums/v405/bzebern/DSCF5544.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5547.jpg
so steering swap is done
http://img.photobucket.com/albums/v405/bzebern/DSCF5550.jpg
feels so good on the beast
http://img.photobucket.com/albums/v405/bzebern/DSCF5551.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5556.jpg
im done with the steering rack
http://img.photobucket.com/albums/v405/bzebern/DSCF5552.jpg
im done with my front end hooked up headlights, foglights signal lights installed my license plate and align the lights it was so hard without the jdm bracket but worked out fine
http://img.photobucket.com/albums/v405/bzebern/DSCF5553.jpg
tomorrow i will be working on my fuel line to install a fpr
http://img.photobucket.com/albums/v405/bzebern/DSCF5557.jpg


took this pictures at the machine shop
my ported head is done
http://img.photobucket.com/albums/v405/bzebern/DSCF5558.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5559.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5560.jpg

thanks for the refferal

Today transmission day
Cleaned my transmission with a power washer
http://img.photobucket.com/albums/v405/bzebern/DSCF5582.jpg
Just in case i break this w55 from a 22r
I got an extra and 7mgte turbo transmission so no downtime
http://img.photobucket.com/albums/v405/bzebern/DSCF5611.jpg
The secret of the rwd conversion the bellhousing
http://img.photobucket.com/albums/v405/bzebern/DSCF5584.jpg
Transmission installed today
http://img.photobucket.com/albums/v405/bzebern/DSCF5600.jpg
I also replaced the the throw out bearing
http://img.photobucket.com/albums/v405/bzebern/DSCF5609.jpg
and transmission is mounted
http://img.photobucket.com/albums/v405/bzebern/DSCF5610.jpg
I picked up a driveshaft from a 80 toyota corona wagon too long so i have to have it shortened
its nice 1 piece woot woot!!!
http://img.photobucket.com/albums/v405/bzebern/DSCF5591.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5602.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5600.jpg
So I started with my own big brake bracket
this is Mazda Fc calipers 4 pot right side is stock
and 2002 Mini Cooper S rotor
http://img.photobucket.com/albums/v405/bzebern/DSCF5607.jpg
i have to redrill for the rotor to hold
http://img.photobucket.com/albums/v405/bzebern/DSCF5606.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5612.jpg
I will be picking up the the welded bracket at Wellbuilt Kustoms Jimmy's shop in Buena Park

Enough today Gotta watch Clash of the Titans with my wife


thats correct Eric
5sfe Block from a 92 camry 2.2 or celica or mr2 na but i dont have a 3sgte its a 3sge non turbo jdm which has bigger ports higher stock cams and springs which is useless cause im going to upgrade
today i pick up my home made brackets from wellbuilt kustoms
http://img.photobucket.com/albums/v405/bzebern/DSCF5613.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5614.jpg
the cnc bracket at the bottom borrowed from my friend
http://img.photobucket.com/albums/v405/bzebern/DSCF5615.jpg
Installed it perfectly
http://img.photobucket.com/albums/v405/bzebern/DSCF5616.jpg
and wala im done with my big brake kit for $75
just a little paint here and there
http://img.photobucket.com/albums/v405/bzebern/DSCF5619.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5620.jpg
i also installed my custom brackets made by danstoy with the slave cylinder and exhaust bracket
http://img.photobucket.com/albums/v405/bzebern/DSCF5621.jpg

ha ha hopefully everything works....

today i installed the battery at the trunk
its kinda in the middle because i dont want to block the fuel sending unit
and its a pain to change tailights
http://img.photobucket.com/albums/v405/bzebern/DSCF5624.jpg
i have an original hks bov that i took apart because this was a kit for the
my supra tt i have to get a new flange
http://img.photobucket.com/albums/v405/bzebern/DSCF5627.jpg


i know man its cool no one bought it
they never what they could have had and now im to prove them wrong

so i painted some of the engine bracket and starter
http://img.photobucket.com/albums/v405/bzebern/DSCF5641.jpg

so my connecting rods came in today now my stroker is complete
http://img.photobucket.com/albums/v405/bzebern/DSCF5643.jpg
crankshaft
http://img.photobucket.com/albums/v405/bzebern/DSCF5494.jpg
pistons
http://img.photobucket.com/albums/v405/bzebern/DSCF5514.jpg


Modified by bnicolas at 1:54 AM 4/10/2010

update april 14th i picked up my 1 piece custom driveshaft today
http://img.photobucket.com/albums/v405/bzebern/DSCF5659.jpg
installed fits perfect and driveshaft is done
http://img.photobucket.com/albums/v405/bzebern/DSCF5660.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5661.jpg
i found a conquest turbo and took the oil cooler
from the junkyard its 13 row i decided to use this not the rx7 cause its too long it would be hard to fit it in my levin front end plus its oem the lexus v8 only has 5 row i think
http://img.photobucket.com/albums/v405/bzebern/DSCF5653.jpg
added a fan to cool more
http://img.photobucket.com/albums/v405/bzebern/DSCF5654.jpg
i also put a cushion so it wouldnt vibrate at the back and at the bottom
http://img.photobucket.com/albums/v405/bzebern/DSCF5655.jpg
looks like factory install clean and simple also bought new hoses
http://img.photobucket.com/albums/v405/bzebern/DSCF5656.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5657.jpg
and once again i finished the oil cooler
http://img.photobucket.com/albums/v405/bzebern/DSCF5662.jpg
i made a cover for my shifter so loud inside
http://img.photobucket.com/albums/v405/bzebern/DSCF5663.jpg
too much holes he he so i decided to do a clean one
http://img.photobucket.com/albums/v405/bzebern/DSCF5664.jpg
test fit perfect
http://img.photobucket.com/albums/v405/bzebern/DSCF5665.jpg
painted it
http://img.photobucket.com/albums/v405/bzebern/DSCF5666.jpg
and done
http://img.photobucket.com/albums/v405/bzebern/DSCF5670.jpg

Modified by bnicolas at 7:59 PM 4/14/2010


Modified by bnicolas at 7:59 PM 4/14/2010

no they are not the same
im using a custom bracket for my transmission

update today april 17th
my steel braided lines came in it cost me almost freakin $400
on this lines i could have just gone with copper but its done already
http://img.photobucket.com/albums/v405/bzebern/DSCF5672.jpg
installed on the brake calipers
http://img.photobucket.com/albums/v405/bzebern/DSCF5673.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5674.jpg
i relocated the distributor block hide it somewhere it couldnt be seen
http://img.photobucket.com/albums/v405/bzebern/DSCF5675.jpg
tightened the hoses
http://img.photobucket.com/albums/v405/bzebern/DSCF5680.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5678.jpg
i bypassed the clutch start switch
http://img.photobucket.com/albums/v405/bzebern/DSCF5681.jpg
i made my own jumper wire
http://img.photobucket.com/albums/v405/bzebern/DSCF5682.jpg
and brake lines done
http://img.photobucket.com/albums/v405/bzebern/DSCF5679.jpg
i pulled the wiring harness out the engine bay to be ready
http://img.photobucket.com/albums/v405/bzebern/DSCF5684.jpg
i decided to shortened my custom throttle cable
this came off a camry cruise control cable so its still oem and toyota ;)
http://img.photobucket.com/albums/v405/bzebern/DSCF5685.jpg
pulled it out
http://img.photobucket.com/albums/v405/bzebern/DSCF5688.jpg
cut drill etc...
http://img.photobucket.com/albums/v405/bzebern/DSCF5689.jpg
cutting the outer housing
http://img.photobucket.com/albums/v405/bzebern/DSCF5690.jpg
and the inner cable
http://img.photobucket.com/albums/v405/bzebern/DSCF5691.jpg
installing it back
http://img.photobucket.com/albums/v405/bzebern/DSCF5692.jpg
and throttle cable is done
http://img.photobucket.com/albums/v405/bzebern/DSCF5694.jpg


dude dont forget to spread the word for the sds standalone still for sale

today i removed my rearend due to my 4.8 gear im not N/A anymore
got to make room for spool for my gt35 dbb lol!!!
bear in mind that this is brand new gearing with new bearings
mann im so tired of this might as well do now than later since my engine is out
car is still on jackstands and already upgrading
http://img.photobucket.com/albums/v405/bzebern/DSCF5699.jpg
draining fluids
http://img.photobucket.com/albums/v405/bzebern/DSCF5697.jpg
removing axles
http://img.photobucket.com/albums/v405/bzebern/DSCF5698.jpg
and what do we have here my little parts corner
http://img.photobucket.com/albums/v405/bzebern/DSCF5695.jpg
and look what i have found a 3.9 gear with lsd looks good
http://img.photobucket.com/albums/v405/bzebern/DSCF5696.jpg
and diff is out
http://img.photobucket.com/albums/v405/bzebern/DSCF5700.jpg
and time to go to shop again to have the lsd installed and 3.9 gear installed
for the freaking 2nd time
http://img.photobucket.com/albums/v405/bzebern/DSCF5701.jpg


update may1st
changing the compressor wheel on my dbb35
http://img.photobucket.com/albums/v405/bzebern/DSCF5716.jpg
http://img.photobucket.com/albums/v405/bzebern/DSCF5717.jpg
and its done just got to have it balanced
http://img.photobucket.com/albums/v405/bzebern/DSCF5718.jpg
the secret to oil starvation high volume oil pump some people dont know about
http://img.photobucket.com/albums/v405/bzebern/DSCF5719.jpg
high perfomance valve seals
http://img.photobucket.com/albums/v405/bzebern/DSCF5720.jpg
this is a discountinued 1000cc injectors made by phyton (sidemount)
cleaned by rc engineering ready to squirt evenly ha ha ha
perfect for my 3rd gen bored out fuel rail by ats
http://img.photobucket.com/albums/v405/bzebern/DSCF5721.jpg
this is an original greddy type r wastegate 50mm
http://img.photobucket.com/albums/v405/bzebern/DSCF5712.jpg
aeromotive fuel pressure regulator
http://img.photobucket.com/albums/v405/bzebern/DSCF5723.jpg
and my oil sandwhich plate
http://img.photobucket.com/albums/v405/bzebern/DSCF5724.jpg


update today May 22
my 3rd gen 3sgte fuel rail came in
its bored out by ats racing
http://img.photobucket.com/albums/v405/bzebern/DSCF5746.jpg
after cutting and grinding i got a steel feed line from another fuel rail
http://img.photobucket.com/albums/v405/bzebern/DSCF5752.jpg
here you go dual feed rail
http://img.photobucket.com/albums/v405/bzebern/DSCF5753.jpg
and i picked up my rebuilt lsd with weir performance and also installed my new ring and pinion for my turbo set up
http://img.photobucket.com/albums/v405/bzebern/DSCF5743.jpg
its good i had the lsd rebuilt one of my springs broke inside
http://img.photobucket.com/albums/v405/bzebern/DSCF5751.jpg
installed it this sh$$t is heavy using only my arms as a lift but worked out fine
http://img.photobucket.com/albums/v405/bzebern/DSCF5747.jpg
installed the driveshaft
http://img.photobucket.com/albums/v405/bzebern/DSCF5750.jpg
intalled the calipers rotors brake lines
http://img.photobucket.com/albums/v405/bzebern/DSCF5748.jpg
thank god done again!!! for the second time

Grot
05-23-2010, 11:36 PM
Excellent build.

Cant wait to see more.

vip09
05-24-2010, 02:19 AM
Looks amazing. Keep up the great work!

andy
05-24-2010, 05:30 AM
do want.

Shadowlife25
05-24-2010, 06:05 AM
Great progress in such a short time! :bigthumbu

3sgelevin
05-24-2010, 07:12 AM
i just compiled this i started january 1st of this year so it's been almost 5 months
but thank you hopefully it will be done by next 2 months