PDA

View Full Version : Valve keeper Remover



Naemion
04-29-2010, 06:33 AM
looking to /buyborrow one of these from someone. I can pay for shipping to and from me to you, but I would like to get it by this weekend.

This is what it looks like:

http://img.underbid.com/403/746C772D6C69733336323030_0.jpg

4thgenceli
04-29-2010, 06:41 AM
If that's to keep the valves in place while you do some head work (shims/springs/etc), there's an easier way.

Pick up a compression tester, and pressurize the cylinder. This will keep the valves closed while you do the work. Just don't let it loose pressure :P

Naemion
04-29-2010, 06:45 AM
Nope, what this does is it keeps them in place while you push down on the spring and pops them into place, pretty much it is a 2 in one valve spring compressor.

I have the head off the block so I'm not worried about anything falling through, otherwise I would have lost about 6 keepers into the block already, lol.