PDA

View Full Version : 3sgte oil line adapter



02bluerolla
04-24-2010, 01:48 AM
Hey guy I am upgreading my turbo to a garret t3/t4... But am having some problem finding a Oil feed line adaptor.. the one from the block to the turbo... Any suggestions where i can buy one... thanks

88st165
04-24-2010, 03:09 AM
Do you have a 165 or 185 engine? The oil coolers are different so the feed adapters are different. If you have a 185 its easy as its the same for the mr2 so you can get one from KO or ATS.

02bluerolla
04-24-2010, 04:22 PM
i have a st185

karl
04-25-2010, 05:15 AM
go get an M18x1.5 drain plug from autozone/pepboys/etc. i think the tranny drain plugs for the E153 are this thread, if you have a spare tranny lying around.

drill and tap for a 1/8NPT to -4AN adapter. pepboys carries some spectre brand fittings that are pretty inexpensive (i think the 1/8NPT to -4 was like $5).

that's what i used when i built my TD06 setup years ago.

Smaay
04-26-2010, 02:29 PM
search around, there is an actual fitting that screws into the block and has a -4 outlet

karl
04-29-2010, 05:58 PM
true.

batinc.net sells that fitting (pn AM18AN4) for $6 or $7.

the method i posted is nice though if you need it immediately and can't wait for shipping.