PDA

View Full Version : 3sgte clutch in s54 quick reply needed



skidMarkNZ
01-28-2010, 11:46 AM
Hey guys. clutch going cheap that closes in 20 hours on net here...

its from a 1992 mr2 3sgte... with flywheel

will it work with my st215 caldina gtt 4th gen? its going in my corona, so hooking onto either a s53/s54 box or a e153 box...

cheers guys...

andy
01-28-2010, 06:36 PM
e153 only on that one.

Tecker184
01-28-2010, 06:37 PM
yes the fly wheel will work and the pressure plate but if you plan on using a s53/s54 the clutch disc will not work. You would have to use the the disc from said transmission with the mr2 3sgte pressure plate and fly wheel. Or just use a e153 trans

skidMarkNZ
01-29-2010, 12:39 AM
sweet as i might wait then and track down an e153 box first. they seem hard to get, not many v6 camrys get wrecked in manual, and not many mr2 turbos here.

Tecker184
01-29-2010, 06:06 AM
i got lucky my swap came with a e-series transmission.

skidMarkNZ
01-29-2010, 06:25 AM
i got lucky my swap came with a e-series transmission.

jealous much! :sm: