PDA

View Full Version : gen3 oem fuel rail and regulator



lalojamesliz
10-18-2009, 04:55 AM
is $50 for both a good price?

Shadowlife25
10-18-2009, 07:05 AM
Depends, gen3 stuff will only fit a gen3 head to my knowledge, so it's all relative.

Maybe someone that is more intimately familiar with the gen3 will chime in. :)

lalojamesliz
10-18-2009, 03:29 PM
Depends, gen3 stuff will only fit a gen3 head to my knowledge


i have a gen3 top end waiting to be installed :burn: waiting to buy pistons and rods to install it all :)

Sang
10-18-2009, 05:21 PM
Depends, gen3 stuff will only fit a gen3 head to my knowledge, so it's all relative.

Gen3 head has enlarged injector bosses and injector port spacing is different from gen2 so Gen3 rail fits a gen3 head only.
Gen3 FPR is the same as Gen2 FPR, interchangeable but no real benefit.

Shadowlife25
10-18-2009, 10:23 PM
There ya go then. :)

Does the rail come loaded (injectors) or is it bare?

rizin
10-18-2009, 11:06 PM
You have the intake that fits I hope since you are having to get the fuel rail.

lalojamesliz
10-19-2009, 02:22 AM
Gen3 head has enlarged injector bosses and injector port spacing is different from gen2 so Gen3 rail fits a gen3 head only.
Gen3 FPR is the same as Gen2 FPR, interchangeable but no real benefit.

i still want that rail Sang, I forgot all about it :( ill send you the payment right now :)

lalojamesliz
10-19-2009, 02:24 AM
There ya go then. :)

Does the rail come loaded (injectors) or is it bare?

its bare but when i complete my parts list for installation i will have 800cc injectors. Im trying to find a apexi power fc to control it all :)

lalojamesliz
10-19-2009, 02:25 AM
You have the intake that fits I hope since you are having to get the fuel rail.

not yet