View Full Version : Poly Motor Mounts

10-08-2009, 01:00 AM
I have a few new items. Motor mounts and the diff cushion are now available.

Below is an ST205 solid rear mount. This is a normal full poly mount and is very hard. It is very strong and will vibrate the fillings out of your teeth on idle. I recommend this for the dedicated track or rally car only.

The mount labeled No.2 below is a little less hard. It is also strong but won't be unbareable if you use the car for more than racing. This is probably best suited for a car that spends a lot of time at the track, but isn't dedicated to it.

The mount labled No.3 below is the least hard of the three and is designed more for the daily driver that sees occasional track time or is more of a touring car, spending weekends on the Dragon. The vibrations won't be noticed in the cabin.

10-08-2009, 01:06 AM
Pics didn't seem to load in. :)


I was a second too soon. After refresh, I see them. ;)

10-08-2009, 01:33 AM
Shore rating on the mounts?

10-08-2009, 01:46 AM
Shore rating on the mounts?

We can do all ShoreA or ShoreB ranges.

For the solid bushings above we typically use 80-85 ShoreA.

The Type 2 design uses 65 ShoreA.

The Type 3 design uses 55-60 Shore A

We can produce any harness level. It all depends on what the client wants. Custom hardness levels are welcomed.

10-08-2009, 05:45 PM

10-08-2009, 06:57 PM
$70 per bushing, regardless of harness level.

10-08-2009, 08:57 PM
I want the combined price with shipping for front and rear engine mounts ST204.
I want the number 3 mounts (no vibration).

And just a question: Which side do you install this (I bet that the mount in your pic is seen from the left of the car)

10-09-2009, 12:44 AM
The one in the pic is the front unit. I'll PM you about adding that to your order.

10-21-2009, 04:29 PM
pm me mate for a full engine kit for mine, at the second level of stiffness.

Plus can you get me a rear diff mount please?

10-21-2009, 04:51 PM
You mean the rectangle rear diff cushion? I would need you to send me yours as a core.

10-21-2009, 04:53 PM
okay, will get a scrap one and post it for you. not a prob

10-21-2009, 05:00 PM
You can put me down for a set (front/rear) in Type 3 :)

10-22-2009, 06:20 AM
How about front and rear type 1 for a ST184?

10-23-2009, 03:17 PM
How about front and rear type 1 for a ST184?

12-13-2009, 04:32 PM
Front and rear type 3 for an auto 5s 91 GT 60A shipped to 30144, please. Just shoot me a PM with PayPal info and whatnot.

12-21-2009, 03:16 PM
Front and rear type 3 for an auto 5s 91 GT 60A shipped to 30144, please. Just shoot me a PM with PayPal info and whatnot.

Behind the 8 ball right now......it's coming, mate.

12-22-2009, 12:05 AM
I'm can wait, it's not like I already sent the money or anything ;p

04-06-2010, 11:17 PM
Finally got around to installing the mounts, they work great (my rear mount was about 75% ripped on one side). Even with the Type 3 and 50A hardness there's more vibration in gear while stopped and in gear (easy fix, just take it out of drive), and while driving they don't add any extra vibration at all.

10-22-2010, 10:58 PM
you still selling these? I sent you a PM yesterday, but received no response. Please check it out.