PDA

View Full Version : Negitive Camber Wear



CoolHand1134
09-08-2009, 03:32 PM
i noticed the other day that my tires front and rear are getting worn on the inside so i went to get an allignment done and the shop couldnt get the car lined up they suggested i buy adjustable control arms and a camber kit. Sooo where better to ask to find some then Ctech!!

the car is a 92 gt lowered 1.5inch

let me know where to look

Trance4c
09-08-2009, 04:05 PM
Camber is not adjustable, the solution is a camber bolt kit. They should be easily found.

CoolHand1134
09-08-2009, 04:51 PM
Camber is not adjustable, the solution is a camber bolt kit. They should be easily found.

i am not having much luck finding a camber kit. i read someplace on here that i can use 6th gen control arms in the rear to make adjustments is this true?

Slider
09-08-2009, 05:16 PM
http://www.tirerack.com/suspension/suspension.jsp?&make=Eibach&model=Recommended+Align.+Kit&group=Recommended+Align.+Kit&autoMake=Toyota&autoModel=Celica+GT&autoYear=1992&autoModClar=&partNum=5.81270K&perfCode=S

or

http://www.tirerack.com/suspension/suspension.jsp?&make=Ingalls&model=FastCam+Bolt&group=FastCam+Bolt&autoMake=Toyota&autoModel=Celica+GT&autoYear=1992&autoModClar=&partNum=NI81290&perfCode=S

CoolHand1134
09-08-2009, 06:26 PM
http://www.tirerack.com/suspension/suspension.jsp?&make=Eibach&model=Recommended+Align.+Kit&group=Recommended+Align.+Kit&autoMake=Toyota&autoModel=Celica+GT&autoYear=1992&autoModClar=&partNum=5.81270K&perfCode=S

or

http://www.tirerack.com/suspension/suspension.jsp?&make=Ingalls&model=FastCam+Bolt&group=FastCam+Bolt&autoMake=Toyota&autoModel=Celica+GT&autoYear=1992&autoModClar=&partNum=NI81290&perfCode=S


sweet i am going to order them today!

METDeath
09-08-2009, 06:50 PM
The Eibach kit is rear only. I should know... I mistakenly bought two kits since the Eibach site says front/rear. So if you only need the rear's aligned, then get that... otherwise I think there's a front/rear kit on eBay.

CoolHand1134
09-09-2009, 12:00 PM
The Eibach kit is rear only. I should know... I mistakenly bought two kits since the Eibach site says front/rear. So if you only need the rear's aligned, then get that... otherwise I think there's a front/rear kit on eBay.


ok thanks i order 2 kits yesterday thinking to would work for both, will have to correct that today. i do need the front and rear i will check out ebay

METDeath
09-09-2009, 01:36 PM
ok thanks i order 2 kits yesterday thinking to would work for both, will have to correct that today. i do need the front and rear i will check out ebay

Basically, look for a kit that has two different cam sizes on the bolt. Oh, and make sure the place you're taking the car to get aligned knows the torque spec for the bolts, they tend to be a bit more fragile than the stock ones.

Stock torque spec: 275
Eibach torque spec: 75