PDA

View Full Version : air intake tubing



celliboy8804
08-11-2009, 12:29 AM
ok i have a 92 celica gt and i wanted to put this intake on it but be for i buy what is the tubing for mine stock intake has no tubing to it. And where does the temp gage. Thanks




http://i691.photobucket.com/albums/vv273/jordanhead2011/celicaintake.jpg

Grot
08-11-2009, 02:16 AM
i believe that should be the EGR hose

rizin
08-11-2009, 02:21 AM
Maybe for the pcv valve on the valve cover for a specific model or it is just a generic photo since a lot of places do that. My pcv valve goes to my intake on my old 92 5s.

Carolina91GT-S
08-11-2009, 02:21 AM
I think that is the air intake temp sensor

celliboy8804
08-11-2009, 04:45 PM
I think that is the air intake temp sensor



mine is just a plugs into the air box not with a tube please help????

Hipster Lawrence
08-11-2009, 08:11 PM
It's for a pcv hose most likely it goes to the valve cover. If your car does not have a pcv hose to the airbox then just cap it off.

Just drill a hole for the temp sensor. Or just let it hang because the engine bay temp will be pretty much your air temp with that intake.

Shadowlife25
08-11-2009, 09:16 PM
It's for a pcv hose most likely it goes to the valve cover. If your car does not have a pcv hose to the airbox then just cap it off.

Just drill a hole for the temp sensor. Or just let it hang because the engine bay temp will be pretty much your air temp with that intake.

^^ Winner.

jimbob789
08-12-2009, 02:22 AM
With the sensor, what i did is make a hole on the side of the pipe not too big nor too small. Then took the seal/gromet of the airbox and put inside the hole.
Plug in sensor, done.

http://carphotos.cardomain.com/ride_images/3/2754/2861/31883930328_large.jpg
http://carphotos.cardomain.com/ride_images/3/2754/2861/31883930329_large.jpg

bobblyhead
08-12-2009, 03:08 AM
I did the same as jimbob789. That's just a generic picture used. Honda's have a tube that connects to the valve cover, as it is for emmisions. The 5SFE takes a different route and attaches to the intake manifold via the pvc. :-D Enjoy the sound.

celliboy8804
08-12-2009, 04:59 PM
With the sensor, what i did is make a hole on the side of the pipe not too big nor too small. Then took the seal/gromet of the airbox and put inside the hole.
Plug in sensor, done.

http://carphotos.cardomain.com/ride_images/3/2754/2861/31883930328_large.jpg
http://carphotos.cardomain.com/ride_images/3/2754/2861/31883930329_large.jpg


ok cool thanks

wizzards581
08-13-2009, 02:43 AM
looks like the pcv.. the one that goes onto the valvecover