PDA

View Full Version : Poly motor mounts?



Tecker184
07-22-2009, 06:47 AM
Does anyone know were i can get ahold of polyurethane to fill my mounts with? I have seen pictures and read about it being done. Just never knew were i could buy it from. Any Info would be great.

RIalltrac
07-22-2009, 02:30 PM
I've used whats called a casting compound from McMaster-Carr... http://www.mcmaster.com/#8644k11/=2utey9 Theres as list there with all the available hardness' available. I want to say i've used an 80A for my rear diff mount and I've used the same stuff to fille motor mounts.

Tecker184
07-22-2009, 03:27 PM
i thank you sir

Trance4c
07-22-2009, 04:21 PM
Or.. you could just get a cauking tube of Window Weld.

Or, get the true thing from Speed Source.. uber nice, not overly expensive!

ChrisD
07-22-2009, 05:23 PM
Home Depot - PL Premium Polyurethane Construction Adhesive

I've had that for several years now and still holding strong.

BlueDragon
07-23-2009, 06:04 PM
I Second Speed-Source, your going to waste more time and energy and end up with an inferior product if you produce it yourself, no offense its just a fact. Very reasonably priced and super easy install. I love them and the solid sub-frame bushings.

Trance4c
07-23-2009, 06:36 PM
X2 on the solid subframe bushings as well!!

uber smooth after install of all those parts.

RedRkt01
07-23-2009, 06:42 PM
X2 on the solid subframe bushings as well!!

uber smooth after install of all those parts.

I wasn't aware they did rear subframe bushings.

Trance4c
07-23-2009, 06:50 PM
I wasn't aware they did rear subframe bushings.

We're not talking rear subframe.

RedRkt01
07-23-2009, 07:11 PM
I saw "subframe" and immediately thought rear.......


I've heard lots of good things about the longitudinal subframe solid bushings. I'm going to get some.

Tecker184
07-23-2009, 07:11 PM
yea im prolly going with the speed source mounts. Were do the sub frame mounts go on my gt-s?

Trance4c
07-23-2009, 07:49 PM
The solid subframe bushings are the ones used on the underbody brace that has the fore and aft motor mounts on it. This is the front subframe.

anachranerd
07-23-2009, 08:35 PM
I tried creating my own mounts with window weld. I fucked it up. Did it in the freezing cold.

here's the other thing. Ive heard from a few people that installing too stiff of mounts can snap your axles.

ya got me.

Shadowlife25
07-24-2009, 10:19 AM
OR.... You could get the set for $50 shipped from Kirkosaurus on MR2oc.com.

Thats what I have and I love them.